Rotary Gear Pump Head: Direct Drive, Cast Iron, 3/8" FNPT, Steel, SS, 500 SUS Max. Viscosity
In Stock
$695.50
Save 21%
$552.55
/each
Earn 552 points for this item
($5.52 for your next purchase!)
REGISTER NOW TO EARN!
Request quantity discount pricing
You're Viewing
DAYTON Rotary Gear Pump Head: Direct Drive, Cast Iro...
Mfr # 4KHC6
$552.55
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2578 |
| Brand | DAYTON |
| Operating Temp. Range | 32 Degrees F to 280 Degrees F |
| Overall Height | 5.6 in |
| Drive Type | Direct Drive |
| Product Powered by Fossil Fuel | N |
| Inlet Gender | Female |
| Flow Rate @ 25 psi | 6.9 gpm |
| Gear Pump Type | External |
| Includes Relief Valve | Yes, Relief Valve Included |
| Suction Lift - Maximum | 7.9 ft |
| Feet of Head - Maximum | 288 ft |
| Flow Rate @ 100 psi | 6.5 gpm |
| Shaft Outer Diameter | 5/8 in |
| Ozone Depleting Substance | N |
| O-Ring Material | Viton |
| Safety Data Sheet (SDS) Applicable? | N |
| Is this a Hazardous Material Product? | N |
| Includes California Prop 65 Short-Form Warning | Y |
| Overall Width | 5.6 in |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Operating Temperature - Minimum | 32 Degrees F |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Seal Type | Mechanical |
| Series | B-Series |
| Freight Class Code | 39 |
| Shaft Material | Stainless Steel, SS |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Flow Rate @ 125 psi | 6.9 gpm |
| Operating Pressure - Maximum | 125 psi |
| Bushing Material | Cast Iron |
| Flow Rate @ 50 psi | 6.8 gpm |
| Body Material | Cast Iron |
| Discharge Type | FNPT |
| Display Qty | 1 |
| Discharge Gender | Female |
| Inlet Standard | NPT |
| Bearing / Bushing | Cast Iron Bushing |
| For Motor Speed - Maximum | 1,725 RPM |
| Contains California Prop 65 Carcinogen | Y |
| Should Sales be Restricted by Region? | N |
| Required Horsepower | 1-1/2 hp |
| Manufacturer Part Number | 4KHC6 |
| Seal Material | Carbon/Ceramic/Stainless Steel/FKM |
| Ports | 3/8" FNPT |
| Shaft Length | 3-1/2 in |
| Discharge | 3/8 in FNPT |
| Current | 6.6 A |
| Storage Protection Code | A |
| Operating Temperature - Maximum | 280 Degrees F |
| Display Sell UOM | EA |
| Discharge Diameter | 3/8 in |
| Inlet | 3/8 in FNPT |
| Inlet Type | FNPT |
| Gear Design | Spur |
| Motor Mounting Type | Close Coupled |
| For Motor Frame Size | 56C |
| Discharge Standard | NPT |
| Gear Material | Steel |
| Viscosity - Maximum | 500 SUS |
| Flow Rate @ 75 psi | 6.7 gpm |
| Overall Length | 10.5 in |
| Inlet Diameter | 3/8 in |
| Chemical Compatibility | Water, Diesel, Ethylene Glycol, Fuel Oil, Engine Oil |
| Mfr. Model # | 4KHC6 |
Description
RotaryGearPmpHead, CI, 3/8"InletDia, 125psi