Centrifugal Pump: 304 Stainless Steel, 3 hp Horsepower (Max), Three Phase, 230/460V AC, NPT
In Stock
$2,066.00
/each
Earn 2066 points with this purchase
Request quantity discount pricing
You're Viewing
DAYTON Centrifugal Pump: 304 Stainless Steel, 3 hp H...
Item 4JMW5
$2,066.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2528 |
| Brand | DAYTON |
| Flow Rate @ 60 ft of Head (Maximum) | 62 gpm |
| Shaft Outer Diameter | 7/16 in |
| Ozone Depleting Substance | N |
| Best Efficiency Flow | 90 gpm |
| Flow Rate @ 5 ft of Head (Maximum) | 150 gpm |
| Specific Gravity (Maximum) | 1 |
| Motor Type | Three-Phase Induction |
| Seal Type | Mechanical |
| Shaft Material | Stainless Steel |
| Should Sales be Restricted by Region? | N |
| Best Efficiency Head | 48 ft |
| Motor Enclosure | Open Dripproof |
| Discharge Pipe Type | NPT |
| Flow Rate @ 1 ft of Head (Maximum) | 152 gpm |
| Discharge Pipe Size | 1-1/2 in |
| Discharge Port | 1-1/2 in NPT |
| Bearing Type | Ball |
| Suction Port | 2 in NPT |
| Viscosity (Maximum) | 31 SUS |
| Media Temperature (Maximum) | 200 Degrees F |
| Volute Material | 304 Stainless Steel |
| Ambient Temperature (Minimum) | 40 Degrees F |
| Flow Rate @ 80 ft of Head (Maximum) | 3 gpm |
| Phase | Three |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Flow Rate @ 10 ft of Head (Maximum) | 144 gpm |
| Flow Rate @ 15 ft of Head (Maximum) | 138 gpm |
| Seal Material | Ceramic, Stainless Steel, Carbon, Viton |
| Flow Rate @ 20 ft of Head (Maximum) | 131 gpm |
| Duty Cycle | Continuous |
| Flow Rate @ 25 ft of Head (Maximum) | 126 gpm |
| Freight Class Code | 39 |
| Intake Pipe Type | NPT |
| Motor Speed (Maximum) | 3,450 RPM |
| Feet of Head (Maximum) | 81 ft |
| Overall Height | 7.8 in |
| California Prop 65 Reproductive Harm | Y |
| Safety Data Sheet (SDS) Applicable? | N |
| Shut Off Pressure (Maximum) | 150 psi |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Service Factor | 1.15 |
| Frequency | 60 Hz |
| Flow Rate @ 70 ft of Head (Maximum) | 25 gpm |
| Ambient Temperature (Maximum) | 104 Degrees F |
| California Prop 65 Cancer | Y |
| Storage Protection Code | A |
| Media Temperature (Minimum) | 40 Degrees F |
| Nameplate Voltage | 230/460V AC |
| Flow Rate (Maximum) | 150 gpm |
| Impeller Design | Closed |
| Priming | Manual |
| Product Powered by Fossil Fuel | N |
| Overall Width | 8.6 in |
| Wetted Material | Carbon, 304 Stainless Steel, Ceramic, Viton |
| Case Pressure (Maximum) | 150 psi |
| Compatible Motor Frame | 56J NEMA |
| Display Sell UOM | EA |
| For Use With Potable Systems | No |
| Standards | CUS |
| Housing Material | 304 Stainless Steel |
| Current | 11.6 or 5.8 A |
| Is this a Hazardous Material Product? | N |
| Impeller Material | 304 Stainless Steel |
| Flow Rate @ 30 ft of Head (Maximum) | 116 gpm |
| Manufacturers Warranty Length | 1 yr |
| Discharge Rotation | 90 Degrees Increments |
| California Prop 65 Warning Short Message Compliancy | Y |
| Manufacturer Part Number | 4JMW5 |
| Display Qty | 1 |
| Flow Rate @ 40 ft of Head (Maximum) | 105 gpm |
| Horsepower (Maximum) | 3 hp |
| Flow Rate (Minimum) | 38 gpm |
| Solid Diameter (Maximum) | 0.13 in |
| Intake Pipe Size | 2 in |
| Overall Length | 15.6 in |
| EnvironmentallyPreferable_Indicator | N |
| Mfr. Model # | 4JMW5 |
Description
CntrfugPmp, 304SStl, 3P, 1 1/2in, 3hp, 150gpm