Centrifugal Pump: 304 Stainless Steel, 1 hp Horsepower (Max), Single Phase, 115/230V AC, NPT
In Stock
$1,275.00
/each
Earn 1275 points with this purchase
Request quantity discount pricing
You're Viewing
DAYTON Centrifugal Pump: 304 Stainless Steel, 1 hp H...
Item 4JMV7
$1,275.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2526 |
| Brand | DAYTON |
| Overall Length | 14.3 in |
| Impeller Design | Closed |
| For Use With Potable Systems | No |
| Flow Rate @ 5 ft of Head (Maximum) | 79 gpm |
| Priming | Manual |
| Specific Gravity (Maximum) | 1 |
| Discharge Port | 1-1/4 in NPT |
| Best Efficiency Head | 40 ft |
| Discharge Pipe Type | NPT |
| Intake Pipe Size | 1-1/2 in |
| Flow Rate (Maximum) | 90 gpm |
| EnvironmentallyPreferable_Indicator | N |
| Current | 14.0 or 7.0 A |
| Flow Rate @ 25 ft of Head (Maximum) | 56 gpm |
| Flow Rate @ 1 ft of Head (Maximum) | 82 gpm |
| Should Sales be Restricted by Region? | N |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Duty Cycle | Continuous |
| Viscosity (Maximum) | 31 SUS |
| Feet of Head (Maximum) | 65 ft |
| Standards | CUS |
| Ozone Depleting Substance | N |
| Seal Material | Ceramic, Stainless Steel, Carbon, Viton |
| Manufacturer Part Number | 4JMV7 |
| Is this a Hazardous Material Product? | N |
| Flow Rate (Minimum) | 8 gpm |
| Product Powered by Fossil Fuel | N |
| Best Efficiency Flow | 48 gpm |
| Flow Rate @ 15 ft of Head (Maximum) | 70 gpm |
| Phase | Single |
| Motor Enclosure | Open Dripproof |
| California Prop 65 Warning Short Message Compliancy | Y |
| Discharge Pipe Size | 1-1/4 in |
| Storage Protection Code | A |
| Shut Off Pressure (Maximum) | 150 psi |
| Display Qty | 1 |
| Motor Speed (Maximum) | 3,450 RPM |
| Safety Data Sheet (SDS) Applicable? | N |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Discharge Rotation | 90 Degrees Increments |
| Seal Type | Mechanical |
| Impeller Material | 304 Stainless Steel |
| Volute Material | 304 Stainless Steel |
| Motor Type | Permanent Split Capacitor |
| Suction Port | 1-1/2 in NPT |
| Nameplate Voltage | 115/230V AC |
| California Prop 65 Cancer | Y |
| Solid Diameter (Maximum) | 0.13 in |
| Bearing Type | Ball |
| Display Sell UOM | EA |
| Intake Pipe Type | NPT |
| Overall Height | 7.9 in |
| Flow Rate @ 20 ft of Head (Maximum) | 65 gpm |
| Horsepower (Maximum) | 1 hp |
| Shaft Material | Stainless Steel |
| Ambient Temperature (Minimum) | 40 Degrees F |
| Frequency | 60 Hz |
| Flow Rate @ 10 ft of Head (Maximum) | 75 gpm |
| Compatible Motor Frame | 56J NEMA |
| Housing Material | 304 Stainless Steel |
| Wetted Material | Carbon, 304 Stainless Steel, Ceramic, Viton |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Service Factor | 1.3 |
| Manufacturers Warranty Length | 1 yr |
| Shaft Outer Diameter | 7/16 in |
| Flow Rate @ 30 ft of Head (Maximum) | 48 gpm |
| Overall Width | 6.6 in |
| Case Pressure (Maximum) | 150 psi |
| Media Temperature (Minimum) | 40 Degrees F |
| Freight Class Code | 39 |
| Media Temperature (Maximum) | 200 Degrees F |
| Flow Rate @ 60 ft of Head (Maximum) | 3 gpm |
| California Prop 65 Reproductive Harm | Y |
| Flow Rate @ 40 ft of Head (Maximum) | 26 gpm |
| Mfr. Model # | 4JMV7 |
Description
Cntrfug Pmp, 304SStl, 1P, 1 1/4in, 1hp, 90gpm