Centrifugal Pump: 304 Stainless Steel, 1/2 hp Horsepower (Max), Single Phase, 115/230V AC
In Stock
$1,061.00
/each
Earn 1061 points with this purchase
Request quantity discount pricing
You're Viewing
DAYTON Centrifugal Pump: 304 Stainless Steel, 1/2 hp...
Item 4JMV3
$1,061.00
Customers Also Viewed
No related products found.
Product Details
| Brand | DAYTON |
| Housing Material | 304 Stainless Steel |
| Shaft Outer Diameter | 7/16 in |
| Case Pressure (Maximum) | 150 psi |
| Flow Rate @ 1 ft of Head (Maximum) | 36.5 gpm |
| Discharge Rotation | 90 Degrees Increments |
| California Prop 65 Cancer | Y |
| Solid Diameter (Maximum) | 0.13 in |
| Bearing Type | Ball |
| Compatible Motor Frame | 56J NEMA |
| Overall Width | 6.5 in |
| Best Efficiency Flow | 28 gpm |
| Media Temperature (Maximum) | 200 Degrees F |
| For Use With Potable Systems | No |
| Shut Off Pressure (Maximum) | 150 psi |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Seal Material | Ceramic, Stainless Steel, Carbon, Viton |
| California Prop 65 Reproductive Harm | Y |
| Flow Rate (Maximum) | 38 gpm |
| Manufacturer Part Number | 4JMV3 |
| Overall Length | 13.3 in |
| Impeller Material | 304 Stainless Steel |
| Seal Type | Mechanical |
| Specific Gravity (Maximum) | 1 |
| Standards | CUS |
| Motor Type | Permanent Split Capacitor |
| Frequency | 60 Hz |
| Priming | Manual |
| Flow Rate @ 15 ft of Head (Maximum) | 32 gpm |
| Best Efficiency Head | 22 ft |
| Discharge Pipe Size | 3/4 in |
| Flow Rate @ 20 ft of Head (Maximum) | 29 gpm |
| Viscosity (Maximum) | 31 SUS |
| Product Powered by Fossil Fuel | N |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| California Prop 65 Warning Short Message Compliancy | Y |
| Feet of Head (Maximum) | 50 ft |
| Flow Rate @ 30 ft of Head (Maximum) | 20 gpm |
| Overall Height | 7.9 in |
| Storage Protection Code | A |
| Duty Cycle | Continuous |
| Safety Data Sheet (SDS) Applicable? | N |
| Discharge Pipe Type | NPT |
| Ozone Depleting Substance | N |
| Manufacturers Warranty Length | 1 yr |
| Display Qty | 1 |
| Flow Rate (Minimum) | 5 gpm |
| Suction Port | 3/4 in NPT |
| EnvironmentallyPreferable_Indicator | N |
| Flow Rate @ 10 ft of Head (Maximum) | 34 gpm |
| Flow Rate @ 40 ft of Head (Maximum) | 5 gpm |
| Motor Enclosure | Open Dripproof |
| Wetted Material | Carbon, 304 Stainless Steel, Ceramic, Viton |
| Motor Speed (Maximum) | 3,450 RPM |
| Flow Rate @ 5 ft of Head (Maximum) | 35.5 gpm |
| Service Factor | 1.5 |
| Phase | Single |
| Flow Rate @ 25 ft of Head (Maximum) | 26 gpm |
| Horsepower (Maximum) | 1/2 hp |
| Shaft Material | Stainless Steel |
| Should Sales be Restricted by Region? | N |
| Media Temperature (Minimum) | 40 Degrees F |
| Intake Pipe Size | 3/4 in |
| Intake Pipe Type | NPT |
| Nameplate Voltage | 115/230V AC |
| Display Sell UOM | EA |
| Volute Material | 304 Stainless Steel |
| Ambient Temperature (Minimum) | 40 Degrees F |
| Is this a Hazardous Material Product? | N |
| Impeller Design | Closed |
| Freight Class Code | 39 |
| Current | 7.2 or 3.6 A |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Discharge Port | 3/4 in NPT |
| Mfr. Model # | 4JMV3 |
Description
Cntrfug Pmp, 304SStl, 1P, 3/4in, 1/2hp, 38gpm