Centrifugal Pump: 304 Stainless Steel, 1/3 hp Horsepower (Max), Single Phase, 115/230V AC
In Stock
$882.50
/each
Earn 882 points with this purchase
Request quantity discount pricing
You're Viewing
DAYTON Centrifugal Pump: 304 Stainless Steel, 1/3 hp...
Item 4JMV2
$882.50
Customers Also Viewed
No related products found.
Product Details
| Brand | DAYTON |
| Housing Material | 304 Stainless Steel |
| California Prop 65 Reproductive Harm | Y |
| Display Sell UOM | EA |
| Suction Port | 3/4 in NPT |
| Overall Length | 12.7 in |
| Flow Rate @ 1 ft of Head (Maximum) | 24.5 gpm |
| Impeller Design | Closed |
| Case Pressure (Maximum) | 150 psi |
| Specific Gravity (Maximum) | 1 |
| Priming | Manual |
| Intake Pipe Size | 3/4 in |
| Flow Rate @ 40 ft of Head (Maximum) | 2 gpm |
| Seal Type | Mechanical |
| California Prop 65 Warning Short Message Compliancy | Y |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Freight Class Code | 39 |
| Motor Enclosure | Open Dripproof |
| Motor Type | Permanent Split Capacitor |
| Standards | CUS |
| Compatible Motor Frame | 56J NEMA |
| Shut Off Pressure (Maximum) | 150 psi |
| Media Temperature (Maximum) | 200 Degrees F |
| Impeller Material | 304 Stainless Steel |
| Manufacturers Warranty Length | 1 yr |
| Should Sales be Restricted by Region? | N |
| Discharge Port | 1/2 in NPT |
| Ambient Temperature (Minimum) | 40 Degrees F |
| Manufacturer Part Number | 4JMV2 |
| Flow Rate @ 15 ft of Head (Maximum) | 20 gpm |
| For Use With Potable Systems | No |
| Flow Rate @ 20 ft of Head (Maximum) | 18 gpm |
| Viscosity (Maximum) | 31 SUS |
| Phase | Single |
| Ozone Depleting Substance | N |
| Flow Rate (Maximum) | 21 gpm |
| Intake Pipe Type | NPT |
| Discharge Pipe Size | 1/2 in |
| Duty Cycle | Continuous |
| Frequency | 60 Hz |
| Bearing Type | Ball |
| Motor Speed (Maximum) | 3,450 RPM |
| Discharge Pipe Type | NPT |
| Flow Rate @ 25 ft of Head (Maximum) | 11 gpm |
| Nameplate Voltage | 115/230V AC |
| Shaft Outer Diameter | 7/16 in |
| Flow Rate (Minimum) | 1 gpm |
| Overall Height | 7.9 in |
| Overall Width | 6.5 in |
| Is this a Hazardous Material Product? | N |
| Shaft Material | Stainless Steel |
| Product Powered by Fossil Fuel | N |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Solid Diameter (Maximum) | 0.13 in |
| Best Efficiency Head | 26 ft |
| Display Qty | 1 |
| Safety Data Sheet (SDS) Applicable? | N |
| Wetted Material | Carbon, 304 Stainless Steel, Ceramic, Viton |
| Current | 6.0 or 3.0 A |
| Horsepower (Maximum) | 1/3 hp |
| Seal Material | Ceramic, Stainless Steel, Carbon, Viton |
| Discharge Rotation | 90 Degrees Increments |
| Best Efficiency Flow | 10 gpm |
| California Prop 65 Cancer | Y |
| Feet of Head (Maximum) | 50 ft |
| Flow Rate @ 10 ft of Head (Maximum) | 22 gpm |
| Media Temperature (Minimum) | 40 Degrees F |
| Volute Material | 304 Stainless Steel |
| Flow Rate @ 5 ft of Head (Maximum) | 23.5 gpm |
| EnvironmentallyPreferable_Indicator | N |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Service Factor | 1.6 |
| Storage Protection Code | A |
| Flow Rate @ 30 ft of Head (Maximum) | 10 gpm |
| Mfr. Model # | 4JMV2 |
Description
Cntrfug Pmp, 304SStl, 1P, 1/2in, 1/3hp, 21gpm