Submersible Sump Pump: 1/4 hp, 120V AC, 33 gpm Flow Rate @ 10' of Head, 1 1/2 in FNPT, 3.1 A
In Stock
$600.00
/each
Earn 600 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
DAYTON Submersible Sump Pump: 1/4 hp, 120V AC, 33 gp...
Item 4HU67
$600.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2504 |
| Brand | DAYTON |
| Gauge/Conductor | 18/3 |
| Switch Actuation | Tether Float |
| Standards | CSA |
| Frequency | 60 Hz |
| Shaft Seal Type | Single Mechanical |
| Feet of Head - Maximum | 21 ft |
| Phase | Single |
| NEC Cord Designation | SJTOW |
| Power Source | Corded Electric |
| Duty Cycle | Continuous |
| Liquid Temperature - Maximum | 104 Degrees F |
| Solids Diameter - Maximum | 1/2 in |
| Volute Material | Cast Iron |
| Discharge | 1-1/2 in FNPT |
| Sump Pit Diameter - Minimum | 12 in |
| Flow Rate @ 10 ft of Head | 33 gpm |
| Hazardous Location Class | Not Rated |
| Impeller Design | Vortex |
| Motor Housing Material | Cast Iron |
| Rated Voltage | 120V AC |
| Shaft Seal Material | Carbon/Ceramic |
| For Media Type | Trash Water, Clear Water |
| Horsepower | 1/4 hp |
| Impeller Material | Cast Iron |
| Current | 3.1 A |
| Cord Length | 10 ft |
| Switch Electrical Connection | Piggyback |
| Mfr. Model # | 4HU67 |
| Country of Origin | China (subject to change) |
| UNSPSC | 40151512 |
Description
Submersible Sump Pump, HP 1/4, Rated Voltage 120V AC, Hz 60 Hz, Amps 3.1 A, Switch Actuation Tether Float, Switch Electrical Connection Piggyback, Off Point Variable, On Point Variable, Body Material Cast Iron, Impeller Material Cast Iron, Shaft Seal Material - Pumps Carbon Ceramic, Flow Rate @ 5 Ft. of Head 42 gpm, Flow Rate @ 10 Ft. of Head 33 gpm, Flow Rate @ 15 Ft. of Head 22 gpm, Flow Rate @ 20 Ft. of Head 6 gpm, Max. Head 21 ft, Min. Sump Pit Dia. 12 in, Body Dia. 9 1/8 in