Constant Pressure Booster Pump: 1/2 hp, Single Phase, 115V AC, 35 psi Pressure Boost (Max)
In Stock
$879.50
/each
Earn 879 points with this purchase
Request quantity discount pricing
You're Viewing
DAYTON Constant Pressure Booster Pump: 1/2 hp, Singl...
Item KD-0801844
$879.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2533 |
| Brand | DAYTON |
| Frequency | 60 Hz |
| Inlet Gender | Female |
| Impeller Material | Thermoplastic |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Display Sell UOM | EA |
| Suction Lift - Maximum | 25 ft |
| Cord Length | 5.5 in |
| Pressure Switch Setting - Maximum | 45 psi |
| Should Sales be Restricted by Region? | N |
| Flow Rate - Minimum | 2.9 gpm |
| For Media Type | Clear Water |
| Mounting Orientation | Horizontal |
| Discharge Standard | NPT |
| Manufacturer Warranty Length | 1 yr |
| Electrical Connection Type | Plug-In |
| For Water System Type | Non-Potable Water |
| Full Load Current | 4.9 A |
| Nominal Voltage | 120V AC |
| Solids Diameter - Maximum | 1 in |
| Manufacturer Part Number | 4HFA6 |
| Revolutions per Minute - Maximum | 3,450 RPM |
| Shut Off Pressure - Maximum | 33 psi |
| Includes Controller | Yes |
| Number of Stages | 2 |
| Phase | Single |
| Freight Class Code | 39 |
| Inlet Standard | NPT |
| Standards | CSA Certified, CUS Certified |
| Safety Data Sheet (SDS) Applicable? | N |
| Nameplate Voltage | 115V AC |
| LowLead_WarningMessage | Compliance_LowLead_NotLowLead |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Overall Length | 11.88 in |
| Compatible Intake Pipe Size | 1 in |
| Motor Ambient Temperature (Minimum) | 5 Degrees C |
| Installation | Floor Standing |
| Pressure Switch Setting - Minimum | 14.5 psi |
| Pump Casing Material | Stainless Steel |
| Restricted Sale Code | A9 |
| Power Source | Corded Electric |
| Inlet Diameter | 1 in |
| Discharge Gender | Female |
| Flow Rate - Maximum | 13.4 gpm |
| Inlet Type | FNPT |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| Includes | Pump Controller |
| Overall Width | 8.84 in |
| Impeller Design | Closed |
| Media Temperature - Maximum | 95 Degrees F |
| Motor Design | Capacitor-Start |
| Inlet | 1 in FNPT |
| Storage Protection Code | A |
| Case Pressure - Maximum | 75 psi |
| Display Qty | 1 |
| Is this a Hazardous Material Product? | N |
| Compatible Discharge Pipe Size | 1 in |
| Discharge | 1 in FNPT |
| Priming | Manual |
| Seal Material | Buna-N |
| Ozone Depleting Substance | N |
| Product Powered by Fossil Fuel | N |
| Application | Transfer |
| Motor Enclosure | TEFC |
| Feet of Head - Maximum | 78 ft |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Pump Technology | Centrifugal |
| Pressure Boost - Minimum | 25 psi |
| Discharge Diameter | 1 in |
| Duty Cycle | Continuous |
| Series | HAS |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Media Temp. Range | 95 Degrees F |
| Discharge Type | FNPT |
| Contains California Prop 65 Carcinogen | Y |
| For Use With Potable Systems | No |
| Horsepower | 1/2 hp |
| Overall Height | 13.59 in |
| Pressure Boost - Maximum | 35 psi |
| Thermal Protection | Auto |
| Includes California Prop 65 Short-Form Warning | Y |
| Low Lead Compliance Level | NC |
| Mfr. Model # | 4HFA6 |
Description
Constant Pressure Booster Pump, 1/2 hp