UHMW Polyethylene Bar: 0.5 in Thick, 1.5 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$19.30
/each
Earn 19 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.5 in Thick, 1.5 in x...
Item 497W41
$19.30
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2096 |
| Brand | APPROVED VENDOR |
| Minimum Temperature | -70 Degrees F |
| Color | White |
| Rockwell Hardness | 90 HRR |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Plastic Length | 24 in |
| Backing Type | No Backing |
| UV-Resistant | Not UV-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Material | UHMW Polyethylene |
| Impact Strength | 16.0 ft-lb/in |
| Plastic Width | 1.5 in |
| Metal Detectable | Not Metal Detectable |
| Plastic Clarity | Opaque |
| Machinability | 100 % |
| Shore Hardness | 70 Shore D |
| FDA Compliance | FDA Compliant |
| Scratch-Resistant | Not Scratch-Resistant |
| Water Absorption | 0.01 % |
| Dielectric Strength | 45 kV/mm |
| Wear Rate | Not Rated |
| Flexural Modulus | 400 MPa |
| Plastic Thickness | 0.5 in |
| Static-Resistant | Not Static-Resistant |
| Maximum Temperature | 180 Degrees F |
| Friction Coefficient | 0.15 |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Standards | FDA, UL 94 HB |
| Tensile Strength | 4,400 psi |
| Mfr. Model # | BULK-PS-UHMW-186 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 1.5 in, Plastic Thickness 0.5 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good