UHMW Polyethylene Bar: 0.5 in Thick, 1.5 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$12.99
/each
Earn 12 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.5 in Thick, 1.5 in x...
Item 497W34
$12.99
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2096 |
| Brand | APPROVED VENDOR |
| Color | White |
| Rockwell Hardness | 90 HRR |
| Maximum Temperature | 180 Degrees F |
| Plastic Length | 12 in |
| Minimum Temperature | -70 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Dielectric Strength | 45 kV/mm |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| FDA Compliance | FDA Compliant |
| Standards | FDA, UL 94 HB |
| Water Absorption | 0.01 % |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Impact Strength | 16.0 ft-lb/in |
| Shore Hardness | 70 Shore D |
| Material | UHMW Polyethylene |
| Plastic Thickness | 0.5 in |
| Backing Type | No Backing |
| Static-Resistant | Not Static-Resistant |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Flexural Modulus | 400 MPa |
| Plastic Width | 1.5 in |
| UV-Resistant | Not UV-Resistant |
| Friction Coefficient | 0.15 |
| Tensile Strength | 4,400 psi |
| Wear Rate | Not Rated |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Machinability | 100 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Clarity | Opaque |
| Mfr. Model # | BULK-PS-UHMW-176 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 1.5 in, Plastic Thickness 0.5 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good