UHMW Polyethylene Bar: 0.25 in Thick, 1.5 in x 12 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$9.65
/each
Earn 9 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.25 in Thick, 1.5 in...
Item 497W32
$9.65
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2096 |
| Brand | APPROVED VENDOR |
| Material | UHMW Polyethylene |
| Wear Rate | Not Rated |
| Friction Coefficient | 0.15 |
| Shore Hardness | 70 Shore D |
| Scratch-Resistant | Not Scratch-Resistant |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| FDA Compliance | FDA Compliant |
| Minimum Temperature | -70 Degrees F |
| Dielectric Strength | 45 kV/mm |
| UV-Resistant | Not UV-Resistant |
| Backing Type | No Backing |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Color | White |
| Water Absorption | 0.01 % |
| Flexural Modulus | 400 MPa |
| Maximum Temperature | 180 Degrees F |
| Plastic Length | 12 in |
| Metal Detectable | Not Metal Detectable |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Plastic Clarity | Opaque |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Impact Strength | 16.0 ft-lb/in |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Machinability | 100 % |
| Plastic Thickness | 0.25 in |
| Tensile Strength | 4,400 psi |
| Plastic Width | 1.5 in |
| Rockwell Hardness | 90 HRR |
| Static-Resistant | Not Static-Resistant |
| Standards | FDA, UL 94 HB |
| Mfr. Model # | BULK-PS-UHMW-174 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 12 in, Plastic Width 1.5 in, Plastic Thickness 0.25 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good