UHMW Polyethylene Bar: 0.375 in Thick, 1 in x 24 in, Opaque, White, 4, 400 psi Tensile Strength
In Stock
$12.56
/each
Earn 12 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR UHMW Polyethylene Bar: 0.375 in Thick, 1 in x...
Item 497W21
$12.56
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2096 |
| Brand | APPROVED VENDOR |
| Impact Strength | 16.0 ft-lb/in |
| Color | White |
| Wear Rate | Not Rated |
| Scratch-Resistant | Not Scratch-Resistant |
| Plastic Width | 1 in |
| Plastic Clarity | Opaque |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Metal Detectable | Not Metal Detectable |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Water Absorption | 0.01 % |
| Shore Hardness | 70 Shore D |
| Machinability | 100 % |
| Standards | FDA, UL 94 HB |
| FDA Compliance | FDA Compliant |
| Plastic Thickness | 0.375 in |
| Plastic Length | 24 in |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Temperature Range | -70 Degrees F to 180 Degrees F |
| Tensile Strength | 4,400 psi |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Flexural Modulus | 400 MPa |
| Static-Resistant | Not Static-Resistant |
| Dielectric Strength | 45 kV/mm |
| Maximum Temperature | 180 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Minimum Temperature | -70 Degrees F |
| Friction Coefficient | 0.15 |
| Backing Type | No Backing |
| Material | UHMW Polyethylene |
| Rockwell Hardness | 90 HRR |
| Mfr. Model # | BULK-PS-UHMW-155 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30101615 |
Description
UHMW Polyethylene Bar, UHMW Polyethylene, Standard, Plastic Length 24 in, Plastic Width 1 in, Plastic Thickness 0.375 in, White, Plastic Clarity Opaque, Tensile Strength 4,400 psi, Impact Strength 16.0 ft-lb/in, Friction Coefficient 0.15, Water Absorption 0.01 Percent, Plastic Density 0.034 lb/cu in, Corrosion and Chemical Resistance Good