Submersible Sump Pump: 1/3 hp, 115V AC, 35 gpm Flow Rate @ 10' of Head, 1 1/2 in FNPT, 10 A
In Stock
$506.50
/each
Earn 506 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
GOULDS Submersible Sump Pump: 1/3 hp, 115V AC, 35 gp...
Item 462D15
$506.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2504 |
| Brand | GOULDS |
| Sump Pit Diameter - Minimum | 12 in |
| Manufacturers Warranty Length | 2 yr |
| Phase | Single |
| Rated Voltage | 115V AC |
| NEC Cord Designation | SJTW |
| Switch Actuation | Vertical Float |
| Shaft Seal Material | Silicon Carbide |
| Flow Rate @ 10 ft of Head | 35 gpm |
| Horsepower | 1/3 hp |
| Cord Length | 9 ft |
| Solids Diameter - Maximum | 1/2 in |
| Gauge/Conductor | 18/3 |
| Switch Electrical Connection | Integral |
| Current | 10 A |
| Duty Cycle | Continuous |
| Liquid Temperature - Maximum | 130 Degrees F |
| Impeller Material | Nylon |
| Feet of Head - Maximum | 22 ft |
| Discharge | 1-1/2 in FNPT |
| Standards | UL/CSA |
| Frequency | 60 Hz |
| Mfr. Model # | GSP0311 |
| Country of Origin | China (subject to change) |
| UNSPSC | 40151512 |
Description
Submersible Sump Pump, HP 1/3, Phase - Pumps Single, Rated Voltage 115V AC, Hz 60 Hz, Amps 10 A, Switch Actuation Vertical Float, Switch Electrical Connection Integral, Off Point 3 1/2 in, On Point 7 1/4 in, Body Material Cast Iron, Impeller Material Nylon, Shaft Seal Material - Pumps Silicone Carbide, Flow Rate @ 5 Ft. of Head 42 gpm, Flow Rate @ 10 Ft. of Head 35 gpm, Flow Rate @ 15 Ft. of Head 26 gpm, Flow Rate @ 20 Ft. of Head 11 gpm, Max. Head 22 ft, Min. Sump Pit Dia. 12 in