Booster Pump: 1 hp, Single Phase, 115/230V AC, 10 gpm Best Efficiency Flow, 171 psi Shut Off
In Stock
$1,185.00
Save 3%
$1,143.73
/each
Earn 1143 points for this item
($11.43 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
DAYTON Booster Pump: 1 hp, Single Phase, 115/230V AC...
Mfr # 45MW87
$1,143.73
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2532 |
| Brand | DAYTON |
| Feet of Head - Maximum | 394 ft |
| Media Temperature (Minimum) | 0 Degrees F |
| Freight Class Code | 39 |
| Inlet | 3/4 in FNPT |
| Display Sell UOM | EA |
| Flow Rate @ 140 psi | 8.5 gpm |
| Discharge | 3/4 in FNPT |
| Flow Rate @ 80 psi | 11.7 gpm |
| For Use With Potable Systems | No |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| Nominal Voltage | 120/240V AC |
| Shut Off Pressure - Maximum | 171 psi |
| Full Load Current | 13/6.3 A |
| Flow Rate @ 60 psi | 13.5 gpm |
| Storage Protection Code | A |
| Flow Rate @ 160 psi | 6.5 gpm |
| Case Pressure - Maximum | 300 psi |
| Flow Rate @ 100 psi | 11.5 gpm |
| Ozone Depleting Substance | N |
| Impeller Design | Closed |
| Duty Cycle | Continuous |
| Inlet Diameter | 3/4 in |
| Overall Length | 27.19 in |
| Power Source | Corded Electric |
| For Water System Type | Non-Potable Water |
| Installation | Floor Standing |
| Display Qty | 1 |
| Low Lead Compliance Level | NC |
| Product Powered by Fossil Fuel | N |
| Media Temp. Range | 0 Degrees F to 140 Degrees F |
| Seal Material | Buna-N/Carbon/Ceramic/Stainless Steel |
| Media Temperature - Maximum | 140 Degrees F |
| Number of Stages | 12 |
| Flow Rate @ 10 psi | 15.4 gpm |
| Flow Rate @ 50 psi | 14.1 gpm |
| Flow Rate @ 120 psi | 10 gpm |
| Inlet Standard | NPT |
| Flow Rate @ 40 psi | 14.6 gpm |
| Contains California Prop 65 Carcinogen | Y |
| Overall Width | 6.75 in |
| Should Sales be Restricted by Region? | N |
| Motor Ambient Temperature (Minimum) | 65 Degrees F |
| Motor Enclosure Design | Open Drip Proof |
| Flow Rate @ 30 psi | 14.7 gpm |
| Pump Casing Material | Stainless Steel |
| Discharge Standard | NPT |
| Inlet Gender | Female |
| Flow Rate @ 90 psi | 11.6 gpm |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Best Efficiency Flow | 10 gpm |
| Manufacturer Warranty Length | 1 yr |
| Discharge Type | FNPT |
| Motor Design | Capacitor-Start/Run |
| Manufacturer Part Number | 45MW87 |
| Motor Frame Designation | 56J NEMA |
| Mounting Orientation | Horizontal |
| Nameplate Voltage | 115/230V AC |
| Includes California Prop 65 Short-Form Warning | Y |
| Is this a Hazardous Material Product? | N |
| Standards | cULus Listed |
| Impeller Material | Noryl |
| Compatible Intake Pipe Size | 3/4 in |
| Frequency | 60 Hz |
| Priming | Self-Priming |
| Safety Data Sheet (SDS) Applicable? | N |
| Inlet Type | FNPT |
| Discharge Gender | Female |
| Phase | Single |
| Restricted Sale Code | A9 |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Flow Rate - Maximum | 15 gpm |
| Discharge Diameter | 3/4 in |
| Overall Height | 8.75 in |
| Solids Diameter - Maximum | 0.05 in |
| Revolutions per Minute - Maximum | 3,450 RPM |
| Flow Rate @ 70 psi | 12.6 gpm |
| LowLead_WarningMessage | Compliance_LowLead_NotLowLead |
| Compatible Discharge Pipe Size | 3/4 in |
| Suction Lift - Maximum | 10 ft |
| Horsepower | 1 hp |
| Flow Rate @ 20 psi | 14.8 gpm |
| Motor Enclosure | ODP |
| Mfr. Model # | 45MW87 |
Description
Booster Pump, 1 hp, 115/230V AC