Booster Pump: 1/3 hp, Single Phase, 115/230V AC, 3 gpm Best Efficiency Flow, 90 psi Shut Off
In Stock
$957.50
/each
Earn 957 points with this purchase
Request quantity discount pricing
You're Viewing
DAYTON Booster Pump: 1/3 hp, Single Phase, 115/230V...
Item 45MW66
$957.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2532 |
| Brand | DAYTON |
| Motor Enclosure | ODP |
| Storage Protection Code | A |
| Seal Material | Buna-N/Carbon/Ceramic/Stainless Steel |
| Impeller Material | Noryl |
| Product Powered by Fossil Fuel | N |
| Flow Rate @ 20 psi | 7.8 gpm |
| Motor Design | Capacitor-Start/Run |
| Inlet Type | FNPT |
| Restricted Sale Code | A9 |
| Flow Rate @ 80 psi | 2.9 gpm |
| Should Sales be Restricted by Region? | N |
| Number of Stages | 7 |
| For Use With Potable Systems | No |
| Standards | cULus Listed |
| Manufacturer Part Number | 45MW66 |
| Pump Casing Material | Cast Iron |
| Power Source | Corded Electric |
| Suction Lift - Maximum | 10 ft |
| Priming | Self-Priming |
| Overall Height | 8.75 in |
| Media Temperature - Maximum | 140 Degrees F |
| Full Load Current | 7.5/3.4 A |
| Flow Rate @ 90 psi | 0 gpm |
| Flow Rate @ 70 psi | 4 gpm |
| Flow Rate @ 30 psi | 7.3 gpm |
| Inlet | 3/4 in FNPT |
| Compatible Discharge Pipe Size | 3/4 in |
| Duty Cycle | Continuous |
| Safety Data Sheet (SDS) Applicable? | N |
| Solids Diameter - Maximum | 0.05 in |
| Manufacturer Warranty Length | 1 yr |
| Revolutions per Minute - Maximum | 3,450 RPM |
| Motor Enclosure Design | Open Drip Proof |
| Flow Rate @ 50 psi | 6 gpm |
| Shut Off Pressure - Maximum | 90 psi |
| Phase | Single |
| Freight Class Code | 39 |
| Flow Rate @ 60 psi | 5.1 gpm |
| Horsepower | 1/3 hp |
| Is this a Hazardous Material Product? | N |
| Case Pressure - Maximum | 300 psi |
| California Prop 65 Warning Short Message Compliancy | Y |
| California Prop 65 Reproductive Harm | Y |
| Inlet Gender | Female |
| Inlet Standard | NPT |
| Discharge Standard | NPT |
| Display Qty | 1 |
| Flow Rate @ 10 psi | 9.3 gpm |
| For Water System Type | Non-Potable Water |
| Ozone Depleting Substance | N |
| Motor Frame Designation | 56J NEMA |
| Display Sell UOM | EA |
| Compatible Intake Pipe Size | 3/4 in |
| Media Temp. Range | 0 Degrees F to 140 Degrees F |
| Flow Rate @ 40 psi | 6.8 gpm |
| Inlet Diameter | 3/4 in |
| Nominal Voltage | 120/240V AC |
| Overall Length | 22.13 in |
| Frequency | 60 Hz |
| LowLead_WarningMessage | Compliance_LowLead_NotLowLead |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| California Prop 65 Cancer | Y |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| Installation | Floor Standing |
| Low Lead Compliance Level | NC |
| Media Temperature (Minimum) | 0 Degrees F |
| Mounting Orientation | Horizontal |
| Best Efficiency Flow | 3 gpm |
| Impeller Design | Closed |
| Motor Ambient Temperature (Minimum) | 65 Degrees F |
| Overall Width | 6.75 in |
| Nameplate Voltage | 115/230V AC |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Mfr. Model # | 45MW66 |
Description
Booster Pump, 1/2 hp, 115/230V AC