Booster Pump: 1 1/2 hp, Three Phase, 230/460V AC, 10 gpm Best Efficiency Flow, 1 1/2 in FNPT
In Stock
$1,753.00
/each
Earn 1753 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
DAYTON Booster Pump: 1 1/2 hp, Three Phase, 230/460V...
Item 45MW23
$1,753.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2533 |
| Brand | DAYTON |
| Best Efficiency Flow | 10 gpm |
| Phase | Three |
| Number of Stages | 2 |
| Manufacturer Warranty Length | 1 yr |
| Nameplate Voltage | 230/460V AC |
| Pressure Boost - Maximum | 61 psi |
| Case Pressure - Maximum | 160 psi |
| Motor Enclosure Design | Open Drip Proof |
| Flow Rate @ 50 psi | 20 gpm |
| Shut Off Pressure - Maximum | 65 psi |
| Flow Rate @ 40 psi | 29 gpm |
| Flow Rate @ 60 psi | 10 gpm |
| For Water System Type | Non-Potable Water |
| Horsepower | 1-1/2 hp |
| Suction Lift - Maximum | 25 ft |
| Mounting Orientation | Horizontal |
| Nominal Voltage | 240/480V AC |
| Flow Rate @ 30 psi | 35 gpm |
| Inlet | 1-1/2 in FNPT |
| Pump Casing Material | Cast Iron |
| Standards | cULus Listed |
| Media Temp. Range | 0 Degrees F to 200 Degrees F |
| Motor Frame Designation | 56J NEMA |
| Motor Design | Capacitor-Start/Run |
| Mfr. Model # | 45MW23 |
| Country of Origin | India (subject to change) |
| UNSPSC | 40151503 |
Description
Booster Pump, Phase Three, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 1 1/2 hp, Nameplate Voltage 230/460V AC, Flow Rate @ 30 psi 35 gpm, Flow Rate @ 40 psi 29 gpm, Flow Rate @ 50 psi 20 gpm, Flow Rate @ 60 psi 10 gpm, Shut Off Pressure (Maximum) 65 psi, Compatible Intake Pipe Size 1 1/2 in, Compatible Discharge Pipe Size 1 1/4 in, Intake Type NPT, Mounting Orientation Horizontal, For Use With Potable Systems No, Amps 5.7-5.4/2.7 A