Booster Pump: 1 1/2 hp, Single Phase, 230V AC, 65 gpm Best Efficiency Flow, 44 psi Shut Off
In Stock
$1,496.00
/each
Earn 1496 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
DAYTON Booster Pump: 1 1/2 hp, Single Phase, 230V AC...
Item 45MW20
$1,496.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2532 |
| Brand | DAYTON |
| Motor Design | Capacitor-Start/Run |
| Motor Enclosure Design | Open Drip Proof |
| Nameplate Voltage | 230V AC |
| Flow Rate @ 20 psi | 75 gpm |
| Best Efficiency Flow | 65 gpm |
| Flow Rate @ 30 psi | 61 gpm |
| Nominal Voltage | 240V AC |
| Horsepower | 1-1/2 hp |
| Mounting Orientation | Horizontal |
| Phase | Single |
| Flow Rate @ 40 psi | 36 gpm |
| Motor Frame Designation | 56J NEMA |
| Number of Stages | 1 |
| Shut Off Pressure - Maximum | 44 psi |
| Inlet | 1-1/2 in FNPT |
| Case Pressure - Maximum | 100 psi |
| For Water System Type | Non-Potable Water |
| Media Temp. Range | 0 Degrees F to 200 Degrees F |
| Standards | cULus Listed |
| Pump Casing Material | Cast Iron |
| Manufacturer Warranty Length | 1 yr |
| Pressure Boost - Maximum | 43 psi |
| Suction Lift - Maximum | 25 ft |
| Mfr. Model # | 45MW20 |
| Country of Origin | India (subject to change) |
| UNSPSC | 40151503 |
Description
Booster Pump, Phase Single, Pump Housing Material Cast Iron, Motor Enclosure Open Dripproof, Horsepower 1 1/2 hp, Nameplate Voltage 230V AC, Flow Rate @ 20 psi 75 gpm, Flow Rate @ 30 psi 61 gpm, Flow Rate @ 40 psi 36 gpm, Shut Off Pressure (Maximum) 44 psi, Compatible Intake Pipe Size 1 1/2 in, Compatible Discharge Pipe Size 1 1/4 in, Intake Type NPT, Mounting Orientation Horizontal, For Use With Potable Systems No, Amps 8.4 A, Best Efficiency Pressure 35 psi, Case Pressure (Maximum) 100 psi