Mill Drill: JMD-45GH, Gear Drive, 1 1/2 hp, 115/230V
In Stock
$10,235.00
Save 13%
$8,944.55
/each
Earn 8944 points for this item
($89.44 for your next purchase!)
REGISTER NOW TO EARN!
Request quantity discount pricing
You're Viewing
JET Mill Drill: JMD-45GH, Gear Drive, 1 1/2 hp, 1...
Mfr # JMD-45GH
$8,944.55
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2210 |
| Brand | JET |
| Frequency | 60 Hz |
| Column Material | Cast Iron |
| Motor Speed - Maximum | 1,720 RPM |
| T-Slot Depth | 1 in |
| Manufacturer Part Number | JMD-45GH |
| Contains California Prop 65 Carcinogen | N |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Table Work Surface - Width | 32-1/4 in |
| Ozone Depleting Substance | N |
| Column Depth | 7-7/8 in |
| Head Material | Cast Iron |
| Overall Depth | 29 in |
| Horsepower | 1-1/2 hp |
| Safety Data Sheet (SDS) Applicable? | N |
| Included Powerfeeds | No Powerfeed |
| Quill Diameter | 3 in |
| Freight Class Code | 18 |
| Overall Width | 36 in |
| Is the item Limited Quantity for Transportation? | N |
| Is this a Hazardous Material Product? | N |
| Display Sell UOM | EA |
| Storage Protection Code | A |
| Includes Digital Readout + Includes Power Downfeed | Power Downfeed Not Included - Light not Included - No Powerfeed |
| Includes | Face Mill Cutter Arbor, Mill Drill, R8-7/16 in Draw Bar, (3) Handwheels, (4) Small Handles, Plum Wrench, 3/8 Flat Washer, Crank Handle, Drill Chuck with 13 mm/JT6 Key, (2) Flat Washers, (2) Hex Nuts, Product Registration Card, (2) Drill Arbors, Socket Wrench, 3 in Angle Vise, (3) Hex Wrenches, 3/8 x 1 Socket HD Cap Screw, 17 mm/19 mm Box Wrench, (2) Bolts, 3 in Face Mill Cutter Assembly |
| Table Surface Height | 10-1/2 in |
| Column Shape | Square |
| Swing Measurement | 19-3/4 in |
| Maximum Cross Travel | 8-1/4 in |
| Speed Control | Fixed |
| Includes Stand | Stand Sold Separately |
| Standards | CSA/CUS |
| Column Width | 7-5/8 in |
| Spindle Speed Range | 65 RPM to 1,550 RPM |
| Face Milling Capacity | 4 in |
| Head Swivel - Left | 90 Degrees |
| Should Sales be Restricted by Region? | N |
| Chuck Size | 13 mm |
| Graduations | 0.001 in |
| Head Swivel - Right | 30 Degrees |
| Display Qty | 1 |
| Product Powered by Fossil Fuel | N |
| Milling Head Drive | Gear Drive |
| Power Cord Length | 6 ft |
| Drilling Capacity - Steel | 1-1/4 in |
| Special Permits for Any Mode of Transportation | Not Applicable |
| Operation | Powered |
| Includes Power Downfeed | Power Downfeed Not Included |
| Series | JMD-45GH |
| Spindle Speed - Minimum | 65 RPM |
| End Milling Capacity | 3/4 in |
| Table Work Surface - Depth | 9-1/2 in |
| Spindle Speed - Maximum | 1,550 RPM |
| Table Width x Depth | 32-1/4 in W x 9-1/2 in D |
| Spindle to Table Distance | 18-1/8 in |
| Table Material | Cast Iron |
| Overall Height | 50 in |
| Sound Level | 70 dB |
| Maximum Spindle Travel | 5 in |
| Voltage | 115/230V |
| Includes Chuck | Chuck Included |
| Spindle Taper | R8 |
| Maximum Longitudinal Travel | 20-1/2 in |
| Motor Type | Totally Enclosed Fan-Cooled |
| Drilling Capacity - Iron | 1-1/2 in |
| Number of T-Slots | 4 |
| Contains California Prop 65 Reproductive Toxicant | N |
| Number of Spindle Speeds | 6 |
| Current | 34 A, 8.4 A, 16.8 A, 68 A |
| Phase | Single |
| T-Slot Width | 5/8 in |
| Includes Lights | Light not Included |
| Mfr. Model # | JMD-45GH |
Description
Mill Drill Machine, Power, 1ph, 115/230V