Power Quality Analyzer: For Single/Split/Three Phase, CAT II 1000V/CAT IV 600V, IP65, Digital
In Stock
Typically in Stock
$15,737.00
/each
Earn 15737 points for this item
($157.37 for your next purchase!)
REGISTER NOW TO EARN!
Request quantity discount pricing
You're Viewing
FLUKE Power Quality Analyzer: For Single/Split/Thre...
Mfr # FLUKE-1748/30/EUS
$15,737.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 530 |
| Brand | FLUKE |
| Storage Protection Code | A |
| For Phase | Single, Split, Three |
| Voltage Channels | 4 |
| Includes Software | Yes |
| Power Source | Battery, Wire Leads, Measurement Line |
| Includes Batteries | No |
| Transient Duration | 200 usec |
| Includes | Fluke Energy Analyze Plus Software., Mains Power Cable, Wi-Fi/BLE-to-USB Adapter, Mains Adapter MA-C8, Soft Storage Bag/Case, USB Cable, (2) Alligator Clips (Blue), Set of Cable Markers, (4) I17xx-Flex1500iP 24 in Current Probes, (2) Test Leads (Stack and Non-Stackable, Blue, 7 in), Voltage Test Lead (3-Phase + N), (2) Test Leads (Non-Stackable, Blue, 79 in), (4) Alligator Clips (Black) |
| Alert Type | Light |
| Safety Data Sheet (SDS) Applicable? | N |
| Calibration Frequency | 42.5 to 69 Hz |
| Frequency Rating | 42.5 to 69 Hz |
| Data Logger | Yes |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Power Factor | -1 to 1 |
| Maximum Wattage | 1,000 TW |
| Data Output Type | Wi-Fi, Bluetooth, USB |
| Increment of Variation | 1 mA (Current), 0.1% (THD on Voltage), 0.1V (Voltage), 0.1mV (Auxiliary input), 0.1% (THD on Current), 0.01 Hz (Frequency) |
| Battery Chemistry | Lithium Ion |
| Is this a Hazardous Material Product? | Y |
| Voltage Accuracy | +/-0.10% |
| Calibration Certificate Included | No Certification Included |
| IP Rating | IP65 |
| Contains California Prop 65 Reproductive Toxicant | N |
| Maximum AC Current Measured | 6,000 A |
| Maximum DC Voltage Measured | 1,000 V |
| Standards | IEC 61000-4-30 Class A, IEC 62586-1, IEC 62586-2 (PQI-A-PI device), IEC 60529, IEC 60721-3-3/3M2, IEEE 519, IEC 62133, IEC 61000-4-15, USA (FCC): 47 CFR 15 subpart B, EN 61326-1: Industrial CISPR 11: Group 1, Class A, IEEE 1453, IEC 61000-6-5, IEEE 1459, IEC 61010-2-033: CAT IV 600V, CAT III 1000V, IEC 61010-1, Pollution Degree 2, EN 50160, IEC 60529: IP65, IEC 61000-4-7: Class 1 |
| Peak Capture | No |
| Current Accuracy | +/-5.00% +0.20% |
| Maximum Volt-Amps | 50 VA |
| AC Current Range | 6,000 A |
| Sampling Rate | 10.24 kHz |
| Display Type | Digital |
| Maximum Operating Temperature | 122 Degrees F |
| Manufacturer Warranty Length | 2 yr, 1 yr (Accessories) |
| Current Channels | 4 |
| Tool Width | 7.1 in |
| Harmonic Capture | 2 to 50th |
| Display Sell UOM | EA |
| Manufacturer Part Number | FLUKE-1748/30/EUS |
| Digital Memory Capacity | 2 GB |
| CAT Safety Rating | CAT II 1000V, CAT IV 600V |
| Features | One-Touch Reporting |
| Special Permits for Any Mode of Transportation | N |
| Ozone Depleting Substance | N |
| Should Sales be Restricted by Region? | N |
| Crest Factor | Less Than 3 |
| Display Qty | 1 |
| Contains California Prop 65 Carcinogen | N |
| Input Impedance | 10 megaohm |
| Test Lead Length | 6.5 ft |
| Freight Class Code | 297 |
| Minimum Operating Temperature | -13 Degrees F |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| AC Magnitude Calculation | True RMS |
| Tool Height | 2.1 in |
| Maximum AC Voltage Measured | 1,000 V |
| Testing Functions | Current, Harmonics, Unbalance, Flicker and Rapid Voltage Changes, Phase Load, Flicker, Voltage, Amperage, Inter-Harmonics |
| Tool Length | 9.1 in |
| Contains Volatile Organic Compounds (VOCs) | N |
| Product Powered by Fossil Fuel | N |
| Mfr. Model # | FLUKE-1748/30/EUS |
Description
PowerQualityAnalyzer, 1000 V, 2 GB