Submersible Sump Pump: 1/3 hp, 115V AC, 22 gpm Flow Rate @ 10' of Head, 1 1/4 in MNPT, 2.8 A
In Stock
$575.00
/each
Earn 575 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
DAYTON Submersible Sump Pump: 1/3 hp, 115V AC, 22 gp...
Item 3YU74
$575.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2505 |
| Brand | DAYTON |
| Sump Pit Diameter - Minimum | 12 in |
| Cord Length | 15 ft |
| Power Source | Corded Electric |
| Discharge | 1-1/4 in MNPT |
| Horsepower | 1/3 hp |
| Shaft Seal Type | Single Mechanical |
| Switch Actuation | Tether Float |
| Flow Rate @ 10 ft of Head | 22 gpm |
| Liquid Temperature - Maximum | 104 Degrees F |
| Impeller Design | Vortex |
| Impeller Material | Stainless Steel |
| Volute Material | Stainless Steel |
| Feet of Head - Maximum | 19 ft |
| Rated Voltage | 115V AC |
| Solids Diameter - Maximum | 3/4 in |
| NEC Cord Designation | SJOW |
| Shaft Seal Material | Carbon/Ceramic/Nitrile Rubber |
| Switch Electrical Connection | Piggyback |
| Duty Cycle | Continuous |
| Frequency | 60 Hz |
| Motor Housing Material | Stainless Steel |
| Hazardous Location Class | Not Rated |
| Gauge/Conductor | 18/3 |
| Phase | Single |
| Current | 2.8 A |
| For Media Type | Trash Water, Clear Water |
| Mfr. Model # | 3YU74 |
| Country of Origin | China (subject to change) |
| UNSPSC | 40151512 |
Description
Submersible Sump Pump, HP 1/3, Rated Voltage 115V AC, Hz 60 Hz, Amps 2.8 A, Switch Actuation Tether Float, Switch Electrical Connection Piggyback, Off Point 7 45/64 in, On Point 14 in, Body Material Stainless Steel, Impeller Material Stainless Steel, Shaft Seal Material - Pumps Buna-N, Flow Rate @ 5 Ft. of Head 16 gpm, Flow Rate @ 10 Ft. of Head 8 gpm, Flow Rate @ 15 Ft. of Head 1 gpm, Flow Rate @ 20 Ft. of Head --, Max. Head 16 ft, Min. Sump Pit Dia. 12 in, Body Dia. 9 1/2 in