Submersible Sump Pump: 1/2 hp, 115V AC, 35 gpm Flow Rate @ 10' of Head, 1 1/4 in MNPT, 2.9 A
In Stock
$416.00
/each
Earn 416 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
DAYTON Submersible Sump Pump: 1/2 hp, 115V AC, 35 gp...
Item 3YU73
$416.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2505 |
| Brand | DAYTON |
| Liquid Temperature - Maximum | 104 Degrees F |
| Phase | Single |
| NEC Cord Designation | SJTW |
| Frequency | 60 Hz |
| Impeller Design | Vortex |
| Power Source | Corded Electric |
| Solids Diameter - Maximum | 1/4 in |
| Rated Voltage | 115V AC |
| Impeller Material | Polyamide |
| Sump Pit Diameter - Minimum | 12 in |
| Horsepower | 1/2 hp |
| Cord Length | 10 ft |
| Switch Actuation | Vertical Float |
| Shaft Seal Type | Single Mechanical |
| Duty Cycle | Continuous |
| Feet of Head - Maximum | 25 ft |
| Flow Rate @ 10 ft of Head | 35 gpm |
| Motor Housing Material | Stainless Steel |
| Switch Electrical Connection | Piggyback |
| Volute Material | Stainless Steel |
| Discharge | 1-1/4 in MNPT |
| Current | 2.9 A |
| Shaft Seal Material | Carbon/Ceramic/Nitrile Rubber |
| Gauge/Conductor | 18/3 |
| Hazardous Location Class | Not Rated |
| For Media Type | Trash Water, Clear Water |
| Mfr. Model # | 3YU73 |
| Country of Origin | China (subject to change) |
| UNSPSC | 40151512 |
Description
Submersible Sump Pump, HP 1/2, Rated Voltage 115V AC, Hz 60 Hz, Amps 2.9 A, Switch Actuation Vertical Float, Switch Electrical Connection Piggyback, Off Point 2 9/16 in, On Point 6 13/64 in, Body Material Stainless Steel, Impeller Material Polyamide, Shaft Seal Material - Pumps Buna-N, Flow Rate @ 5 Ft. of Head 42 gpm, Flow Rate @ 10 Ft. of Head 35 gpm, Flow Rate @ 15 Ft. of Head 25 gpm, Flow Rate @ 20 Ft. of Head 12 gpm, Max. Head 25 ft, Min. Sump Pit Dia. 12 in, Body Dia. 9 in