Submersible Sump Pump: 1/4 hp, 115V AC, 11.3 gpm Flow Rate @ 10' of Head, 1 1/4 in MNPT, MNPT
In Stock
$219.25
/each
Earn 219 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
DAYTON Submersible Sump Pump: 1/4 hp, 115V AC, 11.3...
Item 3YU66
$219.25
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2505 |
| Brand | DAYTON |
| Power Source | Corded Electric |
| Frequency | 60 Hz |
| Discharge | 1-1/4 in MNPT |
| Feet of Head - Maximum | 20 ft |
| Shaft Seal Type | Single Mechanical |
| Impeller Design | Vortex |
| Duty Cycle | Intermittent |
| Switch Actuation | Tether Float |
| Hazardous Location Class | Not Rated |
| Cord Length | 10 ft |
| Volute Material | Plastic |
| Gauge/Conductor | 18/3 |
| Rated Voltage | 115V AC |
| Impeller Material | Polyamide |
| Liquid Temperature - Maximum | 104 Degrees F |
| Switch Electrical Connection | Piggyback |
| Current | 2.6 A |
| Horsepower | 1/4 hp |
| Motor Housing Material | Plastic |
| Sump Pit Diameter - Minimum | 12 in |
| NEC Cord Designation | SJTW |
| Solids Diameter - Maximum | 1/8 in |
| For Media Type | Trash Water, Clear Water |
| Shaft Seal Material | Carbon/Ceramic |
| Flow Rate @ 10 ft of Head | 11.3 gpm |
| Phase | Single |
| Mfr. Model # | 3YU66 |
| Country of Origin | China (subject to change) |
| UNSPSC | 40151512 |
Description
Submersible Sump Pump, HP 1/4, Rated Voltage 115V AC, Hz 60 Hz, Amps 2.6 A, Switch Actuation Tether Float, Switch Electrical Connection Piggyback, Off Point 6 in, On Point 11 1/2 in, Body Material Polypropylene, Impeller Material Polyamide, Shaft Seal Material - Pumps Carbon, Ceramic, Flow Rate @ 5 Ft. of Head 16 gpm, Flow Rate @ 10 Ft. of Head 11 gpm, Flow Rate @ 15 Ft. of Head 6 gpm, Max. Head 20 ft, Min. Sump Pit Dia. 12 in, Body Dia. 9 3/4 in, Overall Height 10 3/4 in