Double Diaphragm Pump: Aluminum Body, 1/2 in, NPT Connection, 12 gpm, 231 ft Max. Head
In Stock
$926.50
/each
Earn 926 points with this purchase
Request quantity discount pricing
You're Viewing
DAYTON Double Diaphragm Pump: Aluminum Body, 1/2 in,...
Item KD-0928788
$926.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2546 |
| Brand | DAYTON |
| Feet of Head (Maximum) | 231 ft |
| Fluid Connection Type | NPT Connection |
| Media Discharge Connection Type | NPT |
| Wetted Body Material | Aluminum |
| Port Type Combined | NPT x NPT |
| Seat Material | Aluminum |
| Air Consumption (Maximum) | 17 scfm |
| Manufacturer Part Number | 3HJW7 |
| Includes Clean In Place Technology | No Clean In Place Included |
| Overall Size | 8.7 in x 7.3 in x 10.7 in |
| Diaphragm Base Material | Santoprene |
| Port Location | Bottom Top |
| Flow Rate @ 40 psi | 8 gpm |
| Display Qty | 1 |
| Includes Solenoid | No Solenoid Included |
| Media Discharge Location | Top |
| Duty Cycle | Continuous |
| Media Intake Connection Type | NPT |
| Air Intake Pressure (Maximum) | 100 psi |
| Contains California Prop 65 Carcinogen | Y |
| Operating Pressure (Maximum) | 100 psi |
| Center Section Material | Aluminum |
| Max. Flow Rate Range | 10 to 24.9 gpm |
| Mounting Hardware Material | Steel |
| Display Sell UOM | EA |
| Priming | Self-Priming |
| Flow Rate @ 100 psi | 12 gpm |
| Media Discharge Connection Size | 1/2 in |
| Port Size Combined | 1/2 in x 1/2 in |
| Viscosity (Maximum) | 15,000 cps |
| Media Intake Port Configuration | Center Horizontal |
| Displacement Per Stroke | 0.0169 gal |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Overall Length | 8.7 in |
| Media Temperature (Minimum) | 0 Degrees F |
| Includes | Ball Valve, Manual |
| Manifold Connection Standard | NPT |
| Diaphragm Material | Santoprene |
| Flow Rate @ 80 psi | 11 gpm |
| Air Connection Type | FNPT |
| Flow Rate @ 60 psi | 9 gpm |
| Solid Diameter (Maximum) | 0.03 in |
| Material Conductivity | Conductive |
| Diaphragm Reinforcement | Not Reinforced |
| Pump Operation Type | Air |
| Media Intake Location | Bottom |
| Fluid Connection Size | 1/2 in |
| Overall Height | 10.7 in |
| Fluid Intake Connection | 1/2 in NPT |
| Media Temperature (Maximum) | 212 Degrees F |
| Air Inlet | 1/4 in FNPT |
| For Use With Potable Systems | No |
| Valve Material | EPDM |
| Check Valve Material | EPDM |
| Manufacturers Warranty Length | 1 yr |
| Media Discharge Port Configuration | Center Horizontal |
| Flow Rate @ 20 psi | 5 gpm |
| Valve Type | Ball |
| Air Connection Size | 1/4 in |
| Includes California Prop 65 Short-Form Warning | Y |
| Pump Assembly Type | Bolt |
| Flow Rate (Maximum) | 12 gpm |
| Manifold Port Connection Type | Single Port |
| Fluid Chamber Assembly Type | Bolted |
| Check Seat Material | Aluminum |
| Fluid Discharge Connection | 1/2 in NPT |
| Chemical Compatibility | Calcium Carbonate, Water, Detergents, Diesel, Antifreeze, Motor Oil |
| Media Intake Connection Size | 1/2 in |
| Overall Width | 7.3 in |
| Mfr. Model # | 3HJW7 |
Description
DblDiaphPump, 1/4inFNPT, Santoprene, 12gpm