PPS Sheet: 1.5 in Thick, 12 in x 12 in, Opaque, Off-White, 13, 500 psi Tensile Strength, 1.4 ft-lb/in
In Stock
$6,667.00
/each
Earn 6667 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR PPS Sheet: 1.5 in Thick, 12 in x 12 in, Opaqu...
Item 3GXY5
$6,667.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Shore Hardness | 85 Shore D |
| Machinability | 90 % |
| Dielectric Strength | 540 V/mil |
| Static-Resistant | Static-Resistant |
| Flexural Modulus | 575,000 psi |
| Plastic Clarity | Opaque |
| Impact Strength | 1.4 ft-lb/in |
| Friction Coefficient | 0.4 |
| Standards | ASTM:D6358/D638/D790/D256/D648/D2240/D570/ISO 28078-1/179-1 2039 |
| Light Transmission | 0 % |
| Scratch-Resistant | Scratch-Resistant |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Material | PPS |
| UV-Resistant | UV-Resistant |
| Water Absorption | 0.01 % |
| Plastic Length | 12 in |
| Wear Rate | 8.36 x 10^-6 cu mm/N-m |
| FDA Compliance | 21 CFR 177.2490 |
| Maximum Temperature | 430 Degrees F |
| Plastic Thickness | 1.5 in |
| Rockwell Hardness | 95 HRM |
| Maximum Adhesive Temperature | 100 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Coefficient of Thermal Expansion | 0.28 x 10^-4/K |
| Fabrication | Extruded |
| Minimum Temperature | 32 Degrees F |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Tensile Strength | 13,500 psi |
| Color | Off-White |
| Plastic Width | 12 in |
| Mfr. Model # | 3GXY5 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
PPS Sheet, PPS, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 1.5 in, Off-White, Plastic Clarity Opaque, Tensile Strength 13,500 psi, Impact Strength 1.4 ft-lb/in, Friction Coefficient 0.4, Water Absorption 0.01 Percent, Temperature Range 32 Degrees to 430 Degrees F, Plastic Density 1.35 g/cc, Plastic Hardness Rockwell M84