Magnetic Drive Pump: 3 hp HP, Three Phase, 208-230/460V AC, Polypropylene, 2 in FNPT
In Stock
$3,462.00
Save 17%
$2,875.56
/each
Earn 2875 points for this item
($28.75 for your next purchase!)
REGISTER NOW TO EARN!
1 day
Request quantity discount pricing
You're Viewing
FINISH THOMPSON Magnetic Drive Pump: 3 hp HP, Three Phase, 20...
Mfr # DB15P-M209
$2,875.56
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2530 |
| Brand | FINISH THOMPSON |
| Motor Frame Size | 56C |
| Min Fluid Temperature | 35 Degrees F |
| Shut Off Pressure - Maximum | 41.5 psi |
| Flow @ 18' Head | 130 gpm |
| Motor Design | Three-Phase |
| Pumping Application | Chemical Transfer, Liquid Transfer |
| Best Efficiency Flow | 100 gpm |
| Pump Drive Configuration | Close-Coupled |
| Drive Coupling Type | Magnetic Coupling |
| Priming | Manual |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Housing Material | Polypropylene |
| Ozone Depleting Substance | N |
| Discharge Diameter | 1-1/2 in |
| Best Efficiency Head | 78 ft |
| Contains California Prop 65 Reproductive Toxicant | N |
| Safety Data Sheet (SDS) Applicable? | N |
| Viscosity (Maximum) | 150 cps |
| Flow @ 50' Head | 125 gpm |
| Freight Class Code | 260 |
| Max Fluid Temperature | 180 Degrees F |
| NPSHr | 15 ft |
| Contains California Prop 65 Carcinogen | N |
| Discharge Gender | Male |
| Fluid Temperature Range | 35 Degrees F to 180 Degrees F |
| Number of Stages | 1 |
| Max Ambient Temperature | 180 Degrees F |
| Shaft Seal Type | Sealless |
| Impeller Diameter | 5-13/100 in |
| Chemical Compatibility | Acetic Acid 80%, Hydrochloric/Muriatic Acid 20%, Fertilizer, Sulfuric Acid 10% to 70%, Sodium Bisulfate, Ethylene Glycol, Sodium Bisulfite, Deionized Water, Potassium Hydroxide 50%, Sodium Bicarbonate 10%, Herbicide, Acetic Acid 20%, Sodium Hydroxide/Caustic Soda 20%, Water, Calcium Chloride, Citric Acid 50%, Hydrochloric/Muriatic Acid 37%, Sodium Hydroxide/Caustic Soda 50%, Hydrochloric/Muriatic Acid 100%, Sulfuric Acid 1% to 10%, Antifreeze, Ammonium Hydroxide, Saltwater, Fungicide, Sodium Hydroxide/Caustic Soda 80%, Phosphoric Acid 50% |
| Impeller Material | Polypropylene |
| Bearing Type | Radial, Thrust |
| Pump Mounting Style | Base-Mounted, Foot-Mounted |
| Flow Rate (Maximum) | 130 gpm |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Suction Port | 2 in NPT |
| Port Connections | NPT |
| Discharge Standard | NPT |
| Product Powered by Fossil Fuel | N |
| Manufacturer Part Number | DB15P-M209 |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Horsepower (Maximum) | 3 hp |
| Motor Efficiency Regulation Applicable | Y |
| Storage Protection Code | A |
| Inlet Gender | Female |
| Overall Length | 20.5 in |
| Inlet | 2 in FNPT |
| Mounting Location | Open Air |
| Phase | Three |
| Nameplate Voltage | 208-230/460V AC |
| Flow @ 40' Head | 130 gpm |
| Is this a Hazardous Material Product? | N |
| Max Specific Gravity | 1.8 |
| Discharge | 1-1/2 in NPT |
| Discharge Rotation Increments | 0 Degrees |
| Overall Height | 10.8 in |
| Should Sales be Restricted by Region? | N |
| Full Load Current | 8.2-7.34/3.67A |
| Inlet Type | FNPT |
| Overall Width | 9.7 in |
| NEMA Nominal Efficiency | 86.5 |
| Display Sell UOM | EA |
| Mounting Orientation | Horizontal |
| Flow @ 9' Head | 130 gpm |
| Inlet Diameter | 2 in |
| Case Pressure - Maximum | 90 psi |
| Flow @ 15' Head | 130 gpm |
| Manufacturers Warranty Length | 5 yr |
| Min Ambient Temperature | 32 Degrees F |
| Motor Efficiency Class | NEMA Premium Efficient |
| Flow @ 24' Head | 130 gpm |
| Pump Design | End Suction |
| Max Motor Speed | 3,450 RPM |
| Flow @ 6' Head | 130 gpm |
| Feet of Head (Maximum) | 96 ft |
| Motor Efficiency Compliance Certification Number | CC029A |
| Flow @ 3' Head | 130 gpm |
| Inlet Standard | NPT |
| Gasket Material | FKM |
| Motor Enclosure Type | TEFC |
| Display Qty | 1 |
| Hazardous Location Class | Class I Division 2 |
| Mfr. Model # | DB15P-M209 |
Description
Magnetic Drive Pump, 1 1/2in, MNPT, 3hp, PP