Double Diaphragm Pump: Aluminum Body, 1 in, NPT Connection, 41 gpm, 231 ft Max. Head
In Stock
$1,993.00
Save 13%
$1,741.78
/each
Earn 1741 points for this item
($17.41 for your next purchase!)
REGISTER NOW TO EARN!
Request quantity discount pricing
You're Viewing
DAYTON Double Diaphragm Pump: Aluminum Body, 1 in, N...
Mfr # 34TJ42
$1,741.78
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2546 |
| Brand | DAYTON |
| Overall Size | 8.5 in x 11.3 in x 15.1 in |
| Diaphragm Material | PTFE |
| Diaphragm Reinforcement | Not Reinforced |
| Manufacturers Warranty Length | 1 yr |
| Media Discharge Connection Size | 1 in |
| For Use With Potable Systems | No |
| Display Qty | 1 |
| Displacement Per Stroke | 0.1 gal |
| Fluid Connection Size | 1 in |
| Discharge Type | NPT |
| Flow Rate @ 30 psi | 28 gpm |
| Discharge | 1 in NPT |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Safety Data Sheet (SDS) Applicable? | N |
| Manufacturer Part Number | 34TJ42 |
| Viscosity (Maximum) | 40,000 cps |
| Media Intake Connection Type | NPT |
| Chemical Compatibility | Gasoline, Kerosene, Oil-Based Paint, Calcium Carbonate, Water, Detergents, Diesel, Hydraulic Fluid, Antifreeze, Alcohol, Motor Oil, Diesel Exhaust Fluid |
| Solid Diameter (Maximum) | 0.19 in |
| Overall Height | 15.1 in |
| Feet of Head (Maximum) | 231 ft |
| Port Location | Bottom Top |
| Pump Operation Type | Air |
| Flow Rate @ 100 psi | 50 gpm |
| Overall Width | 11.3 in |
| Check Seat Material | 316 Stainless Steel |
| Fluid Connection Type | NPT Connection |
| Media Discharge Connection Type | NPT |
| Air Inlet | 3/8 in FNPT |
| Ozone Depleting Substance | N |
| Storage Protection Code | A |
| Fluid Intake Connection | 1 in NPT |
| Freight Class Code | 39 |
| Product Powered by Fossil Fuel | N |
| Manifold Port Connection Type | Single Port |
| Max. Flow Rate Range | 25 to 49.9 gpm |
| Contains California Prop 65 Carcinogen | Y |
| Manifold Connection Type | NPT |
| Media Discharge Location | Top |
| Mounting Hardware Material | Steel |
| Center Section Material | Aluminum |
| Non-Wetted Housing Material | Aluminum |
| Operating Pressure (Maximum) | 100 psi |
| Includes | Ball Valve |
| Media Discharge Port Configuration | Center Horizontal |
| Air Intake Connection Type | FNPT |
| Wetted Body Material | Aluminum |
| Inlet Diameter | 1 in |
| Seat Material | 316 SS |
| Port Type Combined | NPT x NPT |
| Port Size Combined | 1 in x 1 in |
| Pump Assembly Type | Bolt |
| Discharge Location | Top |
| Inlet Location | Bottom |
| Air Intake Connection Size | 3/8 in |
| Air Intake Pressure (Maximum) | 100 psi |
| Should Sales be Restricted by Region? | N |
| Flow Rate (Maximum) | 41 gpm |
| Air Connection Size | 3/8 in |
| Media Temperature (Maximum) | 212 Degrees F |
| Fluid Chamber Assembly Type | Bolted |
| Valve Material | PTFE |
| Air Connection Type | FNPT |
| Check Valve Material | PTFE |
| Priming | Self-Priming |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Duty Cycle | Continuous |
| Standards | UL Listed |
| Fluid Discharge Connection | 1 in NPT |
| Material Conductivity | Conductive |
| Includes Solenoid | No Solenoid Included |
| Media Intake Location | Bottom |
| Is this a Hazardous Material Product? | N |
| Air Consumption (Maximum) | 55 scfm |
| Discharge Diameter | 1 in |
| Flow Rate @ 50 psi | 40 gpm |
| Inlet | 1 in NPT |
| Includes California Prop 65 Short-Form Warning | Y |
| Overall Length | 8.5 in |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Media Intake Connection Size | 1 in |
| Media Temperature (Minimum) | 40 Degrees F |
| Media Intake Port Configuration | Center Horizontal |
| Valve Type | Ball |
| Manifold Connection Standard | NPT |
| Diaphragm Base Material | PTFE |
| Display Sell UOM | EA |
| Inlet Type | NPT |
| Includes Clean In Place Technology | No Clean In Place Included |
| Mfr. Model # | 34TJ42 |
Description
DblDiaphragmPump, 3/8inFNPT, PTFE, 41gpm