Booster Pump: 1 hp, Single Phase, 115V AC, 9 gpm Best Efficiency Flow, 1 in FNPT
In Stock
$1,882.00
/each
Earn 1882 points with this purchase
Request quantity discount pricing
You're Viewing
FLINT & WALLING Booster Pump: 1 hp, Single Phase, 115V AC, 9...
Item KD-0801501
$1,882.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2532 |
| Brand | FLINT & WALLING |
| Best Efficiency Flow | 9 gpm |
| Nameplate Voltage | 115V AC |
| Full Load Current | 10 A |
| Flow Rate @ 15 psi | 26 gpm |
| Flow Rate @ 80 psi | 3 gpm |
| Flow Rate @ 50 psi | 10 gpm |
| Power Source | Corded Electric |
| Revolutions per Minute - Maximum | 3,450 RPM |
| Flow Rate - Maximum | 28 gpm |
| Safety Data Sheet (SDS) Applicable? | N |
| Freight Class Code | 39 |
| Duty Cycle | Continuous |
| Overall Height | 8.98 in |
| Shut Off Pressure - Maximum | 112 psi |
| Mounting Orientation | Horizontal |
| Frequency | 60 Hz |
| Nominal Voltage | 120V AC |
| Phase | Single |
| Application | Boosting |
| Pressure Boost - Maximum | 55 psi |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Flow Rate - Minimum | 1 gpm |
| Compatible Discharge Pipe Size | 1 in |
| Media Temp. Range | 34 Degrees F to 104 Degrees F |
| Flow Rate @ 40 psi | 15 gpm |
| Pump Casing Material | Stainless Steel |
| Standards | ANSI 372 255405, CSAus Certified |
| Media Temperature - Maximum | 104 Degrees F |
| Priming | Manual |
| Ozone Depleting Substance | N |
| Product Powered by Fossil Fuel | N |
| Discharge Type | FNPT |
| Motor Ambient Temperature (Minimum) | 32 Degrees F |
| Installation | Floor Standing |
| Feet of Head - Maximum | 235 ft |
| Media Temperature (Minimum) | 34 Degrees F |
| Impeller Material | Stainless Steel |
| For Media Type | Clear Water |
| Contains California Prop 65 Reproductive Toxicant | N |
| Is this a Hazardous Material Product? | N |
| Electrical Connection Type | Plug-In |
| Inlet Standard | NPT |
| Motor Enclosure Design | Totally Enclosed Fan Cooled |
| Thermal Protection | Auto |
| Flow Rate @ 20 psi | 24 gpm |
| Number of Stages | 3 |
| Flow Rate @ 90 psi | 3 gpm |
| Discharge Diameter | 1 in |
| Motor Design | Permanent Split Capacitor |
| Manufacturer Part Number | VP10 |
| Discharge | 1 in FNPT |
| Should Sales be Restricted by Region? | N |
| Low Lead Compliance Level | CE |
| Manufacturer Warranty Length | 1 yr |
| Inlet Gender | Female |
| LowLead_WarningMessage | Compliance_LowLead_Certified |
| Best Efficiency Head | 230 ft |
| Horsepower | 1 hp |
| Flow Rate @ 70 psi | 3 gpm |
| For Use With Potable Systems | Yes |
| Inlet Diameter | 1 in |
| Overall Length | 16.11 in |
| Inlet | 1 in FNPT |
| Flow Rate @ 30 psi | 21 gpm |
| Motor Enclosure | TEFC |
| Overall Width | 7.28 in |
| Storage Protection Code | A |
| Contains California Prop 65 Carcinogen | N |
| Solids Diameter - Maximum | 0 in |
| Discharge Standard | NPT |
| Pump Technology | Centrifugal |
| Compatible Intake Pipe Size | 1 in |
| Motor Ambient Temperature (Maximum) | 104 Degrees F |
| Case Pressure - Maximum | 120 psi |
| Cord Length | 5 ft |
| Inlet Type | FNPT |
| Impeller Design | Closed |
| Flow Rate @ 60 psi | 4 gpm |
| Display Qty | 1 |
| XDELETE - Best Efficiency Pressure | 86 psi |
| For Water System Type | Potable Water |
| Seal Material | Ceramic |
| Discharge Gender | Female |
| Display Sell UOM | EA |
| Flow Rate @ 10 psi | 27 gpm |
| Series | VP |
| Mfr. Model # | VP10 |
Description
Booster Pump, 1 hp, 115V AC