PTFE Roll: 0.01 in Thick, 24 in x 25 ft, Opaque, White, 1, 500 psi Tensile Strength, 3 ft-lb/in
In Stock
$575.00
/each
Earn 575 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR PTFE Roll: 0.01 in Thick, 24 in x 25 ft, Opaq...
Item 30FY61
$575.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2098 |
| Brand | APPROVED VENDOR |
| Coefficient of Thermal Expansion | 13 x 10^-5 |
| Wear Rate | 3.40 x 10^-4 cu mm/N-m |
| Tensile Strength Rating | Poor (0 to 4,999 psi) |
| Maximum Temperature | 500 Degrees F |
| Fabrication | Molded |
| Backing Type | No Backing |
| Shore Hardness | 55 Shore D |
| Water Absorption | 0.01 % |
| UV-Resistant | UV-Resistant |
| Scratch-Resistant | Not Scratch-Resistant |
| Impact Strength Rating | Good (2 to 5.5 ft-lb/in) |
| Plastic Length | 25 ft |
| Material | PTFE |
| Plastic Clarity | Opaque |
| Color | White |
| Metal Detectable | Not Metal Detectable |
| Light Transmission | 9 % |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Rockwell Hardness | 50 HRR |
| Friction Coefficient | 0.08 |
| Static-Resistant | Not Static-Resistant |
| Plastic Thickness | 0.01 in |
| FDA Compliance | Not FDA Compliant |
| Plastic Width | 24 in |
| Dielectric Strength | 80 kV/mm |
| Standards | ASTM D3308, AMS 3652, FDA |
| Flexural Modulus | 0.04 GPa |
| Minimum Temperature | -400 Degrees F |
| Mfr. Model # | G15-10F-24X25 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102015 |
Description
PTFE Roll, PTFE, Grade Standard, Plastic Length 25 ft, Plastic Width 24 in, Plastic Thickness 0.01 in, White, Plastic Clarity Opaque, Tensile Strength 1,500 psi, Impact Strength 3 ft-lb/in, Friction Coefficient 0.08, Water Absorption 0.01 Percent, Temperature Range -400 Degrees to 500 Degrees F, Plastic Density 138.24 lb/cu ft, Plastic Hardness 55D