Centrifugal Pump: 1/3 hp, Single Phase, 115/230V AC, Bronze, 1 in NPT, 3/4 in NPT, 41 gpm Max Flow
In Stock
$799.23
/each
Earn 799 points for this item
($7.99 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
DAYTON Centrifugal Pump: 1/3 hp, Single Phase, 115/2...
Mfr # 2ZWR4
$799.23
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2524 |
| Brand | DAYTON |
| Discharge | 3/4 in NPT |
| Volute Material | Bronze |
| Display Sell UOM | EA |
| Manufacturer Part Number | 2ZWR4 |
| Drive Coupling Type | No Coupling |
| Flow Rate (Maximum) | 41 gpm |
| Discharge Diameter | 3/4 in |
| Discharge Rotation Increments | 0 Degrees |
| Overall Height | 5.8 in |
| Flow @ 40' Head | 10 gpm |
| Best Efficiency Flow | 30 gpm |
| Flow @ 10' of Head | 41 gpm |
| Motor Frame Size | 56J |
| Inlet Position | Center |
| Bearing Type | Ball |
| Intake and Discharge Size | 1 in , 3/4 in |
| Min Head | 10 ft |
| Min Flow | 10 gpm |
| Overall Length | 13.7 in |
| Contains California Prop 65 Carcinogen | Y |
| Discharge Standard | NPT |
| Inlet Diameter | 1 in |
| Discharge Gender | Female |
| Discharge Orientation | Top |
| Feet of Head (Maximum) | 44 ft |
| Wetted Material | Buna-N, Stainless Steel, Bronze, Carbon, Brass, Ceramic |
| Max Fluid Temperature | 200 Degrees F |
| Number of Stages | 1 |
| Discharge Position | Offset |
| Safety Data Sheet (SDS) Applicable? | N |
| For Use With Potable Systems | No |
| Includes California Prop 65 Short-Form Warning | Y |
| Hazardous Location Class | Not Rated |
| Seal Type | Mechanical |
| Inlet Standard | NPT |
| Impeller Design | Semi-Open |
| Shut Off Pressure - Maximum | 19 psi |
| Port Connections | NPT |
| Fluid Temperature Range | 40 Degrees F to 200 Degrees F |
| Inlet Gender | Female |
| Frequency | 60 Hz |
| Pump Housing Material | Bronze |
| Display Qty | 1 |
| Inlet Type | NPT |
| Flow @ 20' Head | 34 gpm |
| Flow @ 30' Head | 25 gpm |
| For Shaft Outside Diameter | 5/8 in |
| Viscosity (Maximum) | 100 SUS |
| Full Load Current | 7.5/3.8 A |
| Motor Enclosure | Open Drip Proof |
| Is this a Hazardous Material Product? | N |
| Phase | Single |
| Storage Protection Code | A |
| Max Motor Speed | 3,450 RPM |
| Should Sales be Restricted by Region? | N |
| Thermal Overload Protection | Yes |
| Min Fluid Temperature | 40 Degrees F |
| Impeller Material | Bronze |
| Solid Diameter (Maximum) | 0.36 in |
| Manufacturers Warranty Length | 1 yr |
| Nameplate Voltage | 115/230V AC |
| Impeller Diameter | 3-3/8 in |
| Motor Enclosure Type | ODP |
| Mounting Orientation | Horizontal |
| Ozone Depleting Substance | N |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Duty Cycle | Continuous |
| Motor Design | Capacitor-Start |
| Overall Width | 5.8 in |
| Max Specific Gravity | 1 |
| Best Efficiency Head | 26 ft |
| Case Pressure - Maximum | 100 psi |
| Shaft Seal Material | Buna-N |
| Pumping Application | Spraying Systems, Condensate Return, Chemical Transfer, Booster Services, Jockey Pump Services, Water Circulation, Boiler Feed, Liquid Transfer, Irrigation, Filtration |
| Standards | UL Recognized Motor |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Discharge Type | NPT |
| Inlet Orientation | Side |
| Inlet | 1 in NPT |
| Chemical Compatibility | Non-Flammable Liquids |
| Horsepower | 1/3 hp |
| Flow @ 15' Head | 37 gpm |
| Priming | Manual |
| Discharge Location | Top Offset |
| Max Ambient Temperature | 40 Degrees C |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Service Factor | 1.75 |
| Shaft Material | 304 Stainless Steel |
| Electrical Connection Type | Hardwired |
| Freight Class Code | 39 |
| Product Powered by Fossil Fuel | N |
| Mfr. Model # | 2ZWR4 |
Description
Pump, 1/3 HP, 1 Ph, 120/240VAC