Centrifugal Pump: 1/2 hp, Single Phase, 115/230V AC, Cast Iron, 1 1/4 in NPT, 1 in NPT, ODP
In Stock
$588.00
Save 13%
$513.24
/each
Earn 513 points for this item
($5.13 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
DAYTON Centrifugal Pump: 1/2 hp, Single Phase, 115/2...
Mfr # 2ZWP1
$513.24
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2524 |
| Brand | DAYTON |
| Display Sell UOM | EA |
| Flow @ 10' of Head | 67 gpm |
| Hazardous Location Class | Not Rated |
| Inlet Standard | NPT |
| Manufacturers Warranty Length | 1 yr |
| Manufacturer Part Number | 2ZWP1 |
| Horsepower | 1/2 hp |
| Max Ambient Temperature | 40 Degrees C |
| Port Connections | NPT |
| Shaft Material | 304 Stainless Steel |
| Mounting Orientation | Horizontal |
| Overall Width | 6.6 in |
| Impeller Design | Semi-Open |
| Includes California Prop 65 Short-Form Warning | Y |
| Discharge Rotation Increments | 0 Degrees |
| Inlet | 1-1/4 in NPT |
| Storage Protection Code | A |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Service Factor | 1.6 |
| Number of Stages | 1 |
| Flow @ 40' Head | 10 gpm |
| Best Efficiency Flow | 38 gpm |
| Motor Enclosure Type | ODP |
| Discharge Type | NPT |
| Min Head | 10 ft |
| Fluid Temperature Range | 40 Degrees F to 200 Degrees F |
| Volute Material | Cast Iron |
| Case Pressure - Maximum | 100 psi |
| Inlet Type | NPT |
| Chemical Compatibility | Non-Flammable Liquids |
| Impeller Material | Cast Iron |
| Shut Off Pressure - Maximum | 19 psi |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Overall Length | 13.6 in |
| Safety Data Sheet (SDS) Applicable? | N |
| Flow @ 30' Head | 40 gpm |
| Duty Cycle | Continuous |
| Feet of Head (Maximum) | 44 ft |
| Product Powered by Fossil Fuel | N |
| Max Specific Gravity | 1 |
| Bearing Type | Ball |
| Min Fluid Temperature | 40 Degrees F |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Shaft Outer Diameter | 5/8 in |
| Full Load Current | 9.6/4.8 A |
| Motor Frame Size | 56J |
| Drive Coupling Type | No Coupling |
| Best Efficiency Head | 27 ft |
| Discharge Orientation | Top |
| Flow @ 15' Head | 63 gpm |
| Discharge | 1 in NPT |
| Phase | Single |
| Standards | UL Recognized Motor |
| Discharge Position | Offset |
| Inlet Gender | Female |
| Inlet Diameter | 1-1/4 in |
| Motor Design | Capacitor-Start |
| Intake and Discharge Size | 1-1/4 in , 1 in |
| Contains California Prop 65 Carcinogen | Y |
| For Use With Potable Systems | No |
| Thermal Overload Protection | Yes |
| Discharge Standard | NPT |
| Solid Diameter (Maximum) | 0.44 in |
| Discharge Location | Top Offset |
| Shaft Seal Material | Buna-N |
| Motor Enclosure | Open Drip Proof |
| Nameplate Voltage | 115/230V AC |
| Discharge Gender | Female |
| Inlet Position | Center |
| Min Flow | 10 gpm |
| Display Qty | 1 |
| Flow Rate (Maximum) | 67 gpm |
| Frequency | 60 Hz |
| Discharge Diameter | 1 in |
| Freight Class Code | 39 |
| Is this a Hazardous Material Product? | N |
| Max Motor Speed | 3,450 RPM |
| Ozone Depleting Substance | N |
| Pump Housing Material | Cast Iron |
| Impeller Diameter | 3-1/2 in |
| Should Sales be Restricted by Region? | N |
| Wetted Material | Buna-N, Stainless Steel, Carbon, Cast Iron, Ceramic |
| Electrical Connection Type | Hardwired |
| Pumping Application | Condensate Return, Spraying Systems, Chemical Transfer, Booster Services, Jockey Pump Services, Water Circulation, Boiler Feed, Liquid Transfer, Irrigation, Filtration |
| Seal Type | Mechanical |
| Viscosity (Maximum) | 100 SUS |
| Priming | Manual |
| Flow @ 20' Head | 57 gpm |
| Overall Height | 5.8 in |
| Max Fluid Temperature | 200 Degrees F |
| Mfr. Model # | 2ZWP1 |
Description
CentrifugalPump, 1/2 hp, CI, 1", BunaN