Centrifugal Pump: Polypropylene, 1/2 hp Horsepower (Max), Single Phase, 115/230V AC, NPT, NPT
In Stock
$1,298.00
/each
Earn 1298 points with this purchase
Request quantity discount pricing
You're Viewing
DAYTON Centrifugal Pump: Polypropylene, 1/2 hp Horse...
Item 2YER3
$1,298.00
Customers Also Viewed
No related products found.
Product Details
| Brand | DAYTON |
| Manufacturer Part Number | 2YER3 |
| Best Efficiency Head | 35 ft |
| Seal Type | Mechanical |
| Freight Class Code | 39 |
| Ambient Temperature (Maximum) | 104 Degrees F |
| Seal Material | Ceramic, Stainless Steel, Carbon, Buna-N |
| Safety Data Sheet (SDS) Applicable? | N |
| Storage Protection Code | A |
| Suction Port | 1-1/2 in NPT |
| Priming | Manual |
| Phase | Single |
| Viscosity (Maximum) | 100 SUS |
| Flow Rate @ 25 ft of Head (Maximum) | 21 gpm |
| EnvironmentallyPreferable_Indicator | N |
| Current | 8.4 or 4.8 A |
| Overall Length | 15 in |
| Product Powered by Fossil Fuel | N |
| Discharge Pipe Type | NPT |
| Service Factor | 1.6 |
| Flow Rate (Maximum) | 26 gpm |
| Flow Rate @ 10 ft of Head (Maximum) | 26 gpm |
| California Prop 65 Cancer | Y |
| Housing Material | Polypropylene |
| Standards | cULus Listed |
| Flow Rate @ 15 ft of Head (Maximum) | 24 gpm |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Discharge Pipe Size | 1-1/2 in |
| Motor Type | Capacitor Start Induction |
| Impeller Material | Polypropylene |
| Feet of Head (Maximum) | 68 ft |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Display Qty | 1 |
| Impeller Design | Closed |
| Discharge Port | 1-1/2 in NPT |
| Intake Pipe Size | 1-1/2 in |
| Media Temperature (Maximum) | 140 Degrees F |
| Shaft Material | Stainless Steel |
| Duty Cycle | Continuous |
| Shut Off Pressure (Maximum) | 68 ft of head |
| Wetted Material | Carbon, Buna-N, Ceramic, Stainless Steel, Polypropylene |
| Discharge Rotation | None |
| California Prop 65 Reproductive Harm | Y |
| Overall Width | 7.6 in |
| Display Sell UOM | EA |
| Overall Height | 7.5 in |
| Flow Rate @ 20 ft of Head (Maximum) | 23 gpm |
| Manufacturers Warranty Length | 1 yr |
| Is this a Hazardous Material Product? | N |
| Nameplate Voltage | 115/230V AC |
| Best Efficiency Flow | 20 gpm |
| Volute Material | Polypropylene |
| Electrical Connection Type | Hardwired |
| Case Pressure (Maximum) | 100 psi |
| Ozone Depleting Substance | N |
| Motor Enclosure | Open Dripproof |
| Flow Rate (Minimum) | 9 gpm |
| Intake Pipe Type | NPT |
| Bearing Type | Ball |
| Frequency | 60 Hz |
| For Use With Potable Systems | No |
| Horsepower (Maximum) | 1/2 hp |
| Flow Rate @ 60 ft of Head (Maximum) | 9 gpm |
| Solid Diameter (Maximum) | 0.25 in |
| Shaft Outer Diameter | 5/8 in |
| Flow Rate @ 30 ft of Head (Maximum) | 19 gpm |
| Specific Gravity (Maximum) | 1 |
| Motor Speed (Maximum) | 3,450 RPM |
| Compatible Motor Frame | 56J NEMA |
| California Prop 65 Warning Short Message Compliancy | Y |
| Flow Rate @ 40 ft of Head (Maximum) | 14 gpm |
| Should Sales be Restricted by Region? | N |
| Mfr. Model # | 2YER3 |
Description
Cntrfug Pmp, PolyP, 1P, 1 1/2in, 1/2hp, 26gpm