Polyethylene Sheet: 0.5 in Thick, 12 in x 4 ft, Opaque, White, 6, 800 psi Tensile Strength, No Break
In Stock
$306.00
/each
Earn 306 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.5 in Thick, 12 in x 4 f...
Item 2XPZ2
$306.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Plastic Thickness | 0.5 in |
| Flexural Modulus | 430 MPa |
| Wear Rate | Not Rated |
| Friction Coefficient | 0.12 |
| Maximum Temperature | 275 Degrees F |
| UV-Resistant | Not UV-Resistant |
| Plastic Width | 12 in |
| Tensile Strength | 6,800 psi |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Material | UHMW Polyethylene |
| Water Absorption | 0.01 % |
| Color | White |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Metal Detectable | Not Metal Detectable |
| Machinability | 100 % |
| Backing Type | No Backing |
| Dielectric Strength | 91 kV/mm |
| Rockwell Hardness | 65 HRM |
| Impact Strength | No Break |
| Scratch-Resistant | Not Scratch-Resistant |
| Shore Hardness | 68 Shore D |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Elongation | 285 % |
| Coefficient of Thermal Expansion | 20 x 10^-5 K^-1 |
| Temperature Range | -22 Degrees F to 275 Degrees F |
| Standards | Not Rated |
| Static-Resistant | Not Static-Resistant |
| Plastic Clarity | Opaque |
| Plastic Length | 4 ft |
| Minimum Temperature | -22 Degrees F |
| Mfr. Model # | PS-UHMW-ET-17 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Enhanced Temperature, Plastic Length 4 ft, Plastic Width 12 in, Plastic Thickness 0.5 in, White, Plastic Clarity Opaque, Tensile Strength 6,800 psi, Impact Strength No Break, Friction Coefficient 0.12, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 275 Degrees F, Plastic Density 0.033 lb/cu in, Plastic Hardness 68D