Nylon Rod: 3 1/2 in Dia, 12 in Lg, Gray, Opaque, 9, 900 psi Tensile Strength, Oil, -40°F to 200°F
In Stock
$273.50
/each
Earn 273 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Rod: 3 1/2 in Dia, 12 in Lg, Gray, Opaq...
Item 2XPR1
$273.50
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Coefficient of Thermal Expansion | 5.5 x 10^-5 in/in/ Degrees F |
| Shore Hardness | 80 Shore D |
| Maximum Temperature | 200 Degrees F |
| Plastic Length | 12 in |
| Friction Coefficient | 0.14 |
| Impact Strength | 0.5 ft-lb/in |
| Minimum Temperature | -40 Degrees F |
| Color | Gray |
| Metal Detectable | Not Metal Detectable |
| FDA Compliance | 21 CFR 177.1500 |
| Scratch-Resistant | Scratch-Resistant |
| Fabrication | Cast |
| Water Absorption | 0.3 % |
| Machinability | 90 % |
| Tensile Strength | 9,900 psi |
| Static-Resistant | Not Static-Resistant |
| UV-Resistant | Not UV-Resistant |
| Dielectric Strength | 600 V/mil |
| Wear Rate | 5.00 x 10^-7 cu mm/N-m |
| Plastic Clarity | Opaque |
| Light Transmission | 75 % |
| Material | Nylon 6 |
| Temperature Range | -40 Degrees F to 200 Degrees F |
| Rockwell Hardness | 85 HRM |
| Filler Material | Oil |
| Standards | ASTM D5989, USDA 3-A Sanitary 10-17, ASTM D4066 |
| Plastic Diameter | 3-1/2 in |
| Mfr. Model # | 2XPR1 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102415 |
Description
Nylon Rod, Nylon 6, Grade Lubricant-Filled, Plastic Length 12 in, Plastic Diameter 3 1/2 in, Gray, Plastic Clarity Opaque, Minimum Temperature -40 Degrees F, Maximum Temperature 200 Degrees F, Tensile Strength 9,900 psi, Impact Strength 0.5 ft-lb/in, Friction Coefficient 0.14, Water Absorption 0.3 Percent, Plastic Hardness 85D