Nylon Sheet: 0.75 in Thick, 12 in x 12 in, Opaque, Gray, 11, 000 psi Tensile Strength, 0.5 ft-lb/in
In Stock
$374.25
/each
Earn 374 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Nylon Sheet: 0.75 in Thick, 12 in x 12 in, Op...
Item 2XPG3
$374.25
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Machinability | 90 % |
| Water Absorption Rating | Good (0.051% to 0.25%) |
| Filler Material | MDS |
| Friction Coefficient | 0.08 |
| Minimum Adhesive Temperature | 140 Degrees F |
| Plastic Clarity | Opaque |
| Dielectric Strength | 400 V/mil |
| UV-Resistant | Not UV-Resistant |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Static-Resistant | Not Static-Resistant |
| Tensile Strength | 11,000 psi |
| Plastic Width | 12 in |
| Flexural Modulus | 500,000 psi |
| Impact Strength | 0.5 ft-lb/in |
| FDA Compliance | 21 CFR Parts 170-199 |
| Shore Hardness | 85 Shore D |
| Maximum Temperature | 200 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Plastic Length | 12 in |
| Light Transmission | 0 % |
| Fabrication | Cast |
| Wear Rate | 1.20 x 10^-7 cu mm/N-m |
| Rockwell Hardness | 80 HRM |
| Scratch-Resistant | Scratch-Resistant |
| Minimum Temperature | -22 Degrees F |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Material | Nylon |
| Water Absorption | 0.25 % |
| Plastic Thickness | 0.75 in |
| Maximum Adhesive Temperature | 200 Degrees F |
| Standards | ASTM D638/ISO 527-1/-2/ASTM D790/ISO 178/ASTM D695/ISO 604 |
| Temperature Range | -22 Degrees F to 200 Degrees F |
| Coefficient of Thermal Expansion | 80 x 10^-6m[m-K] |
| Color | Gray |
| Mfr. Model # | 2XPG3 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Nylon Sheet, Nylon, Grade Lubricant-Filled, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.75 in, Gray, Plastic Clarity Opaque, Tensile Strength 11,000 psi, Impact Strength 0.5 ft-lb/in, Friction Coefficient 0.08, Water Absorption 0.25 Percent, Temperature Range 32 Degrees to 200 Degrees F, Plastic Density 1.15 g/cc, Plastic Hardness 85D