Submersible Sump Pump: 1/2 hp, 115V AC, 53 gpm Flow Rate @ 10' of Head, 1 1/2 in FNPT
In Stock
$499.50
/each
Earn 499 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
LIBERTY PUMPS Submersible Sump Pump: 1/2 hp, 115V AC, 53 gp...
Item 2WMN5
$499.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2505 |
| Brand | LIBERTY PUMPS |
| Current | 7.3 A |
| Rated Voltage | 115V AC |
| NEC Cord Designation | SJTW |
| Frequency | 60 Hz |
| Phase | Single |
| Cord Length | 10 ft |
| Power Source | Corded Electric |
| Discharge | 1-1/2 in FNPT |
| Switch Actuation | Tether Float |
| Horsepower | 1/2 hp |
| Sump Pit Diameter - Minimum | 14 in |
| Operation | Automatic |
| Solids Diameter - Maximum | 3/8 in |
| Impeller Material | Engineered Polymer |
| Flow Rate @ 10 ft of Head | 53 gpm |
| Feet of Head - Maximum | 34 ft |
| Manufacturers Warranty Length | 3 yr |
| Motor Housing Material | Aluminum |
| Gauge/Conductor | 16/3 |
| Switch Electrical Connection | Piggyback |
| For Media Type | Clear Water |
| Standards | CSA/cUS |
| Hazardous Location Class | Not Rated |
| For Industry | Residential |
| Shaft Seal Material | Nitrile Rubber |
| Liquid Temperature - Maximum | 180 Degrees F |
| Series | HT450-Series |
| Impeller Design | Vortex |
| Duty Cycle | Continuous |
| Mfr. Model # | HT453 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 40151512 |
Description
Submersible Sump Pump, HP 1/2, Phase - Pumps 1, Rated Voltage 115V AC, Amps 7.3 A, Switch Actuation Tether Float, Switch Electrical Connection Piggyback, Off Point 3 1/4 in, On Point 10.12 in, Body Material Aluminum, Impeller Material Engineered Polymer, Shaft Seal Material - Pumps Nitrile Rubber, Flow Rate @ 5 Ft. of Head 50.0 gpm, Flow Rate @ 10 Ft. of Head 43 gpm, Flow Rate @ 15 Ft. of Head 39.0 gpm, Flow Rate @ 20 Ft. of Head 32.0 gpm, Max. Head 34 ft, Min. Sump Pit Dia. 14 in