Acetal Sheet: 0.75 in Thick, 12 in x 12 in, White, Opaque, PTFE, 10, 000 psi Tensile Strength
In Stock
$125.00
/each
Earn 125 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Acetal Sheet: 0.75 in Thick, 12 in x 12 in, W...
Item 2VER1
$125.00
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Standards | ASTM D6778, ASTM D4181, ASTM D6100 |
| UV-Resistant | Not UV-Resistant |
| Shore Hardness | 86 Shore D |
| Rockwell Hardness | 79 HRM |
| Temperature Range | -40 Degrees F to 185 Degrees F |
| Flexural Modulus | 450,000 psi |
| Plastic Length | 12 in |
| FDA Compliance | 21 CFR 177.2480 |
| Machinability | 100 % |
| Elongation | 25 % |
| Water Absorption | 0.25 % |
| Dielectric Strength | 500 kV/in |
| Maximum Temperature | 185 Degrees F |
| Plastic Clarity | Opaque |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Filler Material | PTFE |
| Minimum Adhesive Temperature | -30 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Impact Strength | 1.5 ft-lb/in |
| Plastic Thickness | 0.75 in |
| Light Transmission | 0 % |
| Water Absorption Rating | Good (0.051% to 0.25%) |
| Minimum Temperature | -40 Degrees F |
| Coefficient of Thermal Expansion | 4.7 x 10^-5 in/in/ Degrees F |
| Maximum Adhesive Temperature | 180 Degrees F |
| Friction Coefficient | 0.3 |
| Material | Acetal Homopolymer |
| Plastic Width | 12 in |
| Fabrication | Extruded |
| Color | White |
| Tensile Strength | 10,000 psi |
| Wear Rate | 3.00 x 10^-6 cu mm/N-m |
| Metal Detectable | Not Metal Detectable |
| Scratch-Resistant | Scratch-Resistant |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Mfr. Model # | 2VER1 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Acetal Homopolymer Sheet, Acetal Homopolymer, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.75 in, White, Plastic Clarity Opaque, Tensile Strength 10,000 psi, Impact Strength 1.5 ft-lb/in, Friction Coefficient 0.3, Water Absorption 0.25 Percent, Temperature Range 32 Degrees to 185 Degrees F, Plastic Density 1.41 g/cc, Plastic Hardness Rockwell M94