Acetal Sheet: 0.375 in Thick, 12 in x 12 in, White, Opaque, PTFE, 10, 000 psi Tensile Strength
In Stock
$68.05
/each
Earn 68 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Acetal Sheet: 0.375 in Thick, 12 in x 12 in,...
Item 2VEP7
$68.05
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Tensile Strength Rating | Excellent (10,000+ psi) |
| Maximum Adhesive Temperature | 180 Degrees F |
| Shore Hardness | 86 Shore D |
| Coefficient of Thermal Expansion | 4.7 x 10^-5 in/in/ Degrees F |
| Minimum Adhesive Temperature | -30 Degrees F |
| Plastic Width | 12 in |
| Impact Strength | 1.5 ft-lb/in |
| Impact Strength Rating | Poor (0 to 1.9 ft.lb/in) |
| Dielectric Strength | 500 kV/in |
| Scratch-Resistant | Scratch-Resistant |
| Fabrication | Extruded |
| Plastic Length | 12 in |
| Plastic Thickness | 0.375 in |
| Water Absorption Rating | Good (0.051% to 0.25%) |
| Temperature Range | -40 Degrees F to 185 Degrees F |
| Rockwell Hardness | 79 HRM |
| Water Absorption | 0.25 % |
| Minimum Temperature | -40 Degrees F |
| Machinability | 100 % |
| Tensile Strength | 10,000 psi |
| Maximum Temperature | 185 Degrees F |
| Material | Acetal Homopolymer |
| Elongation | 25 % |
| Color | White |
| Metal Detectable | Not Metal Detectable |
| Static-Resistant | Not Static-Resistant |
| Standards | ASTM D6778, ASTM D4181, ASTM D6100 |
| Plastic Clarity | Opaque |
| UV-Resistant | Not UV-Resistant |
| Flexural Modulus | 450,000 psi |
| FDA Compliance | 21 CFR 177.2480 |
| Light Transmission | 0 % |
| Friction Coefficient | 0.3 |
| Wear Rate | 3.00 x 10^-6 cu mm/N-m |
| Filler Material | PTFE |
| Mfr. Model # | 2VEP7 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 30102515 |
Description
Acetal Homopolymer Sheet, Acetal Homopolymer, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.375 in, White, Plastic Clarity Opaque, Tensile Strength 10,000 psi, Impact Strength 1.5 ft-lb/in, Friction Coefficient 0.3, Water Absorption 0.25 Percent, Temperature Range 32 Degrees to 185 Degrees F, Plastic Density 1.41 g/cc, Plastic Hardness Rockwell M94