Magnetic Drive Pump: 3/4 hp HP, Single Phase, 115/230V AC, Glass-Filled Polyphenylene
In Stock
$2,478.00
Save 21%
$1,967.49
/each
Earn 1967 points for this item
($19.67 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
LITTLE GIANT Magnetic Drive Pump: 3/4 hp HP, Single Phase,...
Mfr # 587010
$1,967.49
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2530 |
| Brand | LITTLE GIANT |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Max Ambient Temperature | 77 Degrees F |
| Min Fluid Temperature | 32 Degrees F |
| Full Load Current | 11.8 A |
| Horsepower (Maximum) | 3/4 hp |
| Is this a Hazardous Material Product? | N |
| Phase | Single |
| Max Fluid Temperature | 200 Degrees F |
| Display Qty | 1 |
| Manufacturers Warranty Length | 1 yr |
| Ozone Depleting Substance | N |
| Overall Length | 17.3 in |
| Motor Design | Permanent Split Capacitor |
| Flow @ 3' Head | 51 gpm |
| Bearing Type | Ball |
| Chemical Compatibility | Plating Solutions, Copper Sulfate 5%, Lactic Acid, Sodium Sulfide, Barium Hydroxide, Naphthalene, Gasoline, Sodium Aluminate, Acid, Ethylene Chloride, Diesel Fuel, Sodium Bisulfate, Ethylene Glycol, Perchloroethylene, Benzene, Soap, Kerosene, Vinegar, Sodium Bisulfite, Calcium Sulfate, Chlorobenzene, Sodium Cyanide, Sodium Carbonate, Ethyl Chloride, Magnesium Hydroxide, Potassium Dichromate, Zinc Sulfate, Copper Cyanide, Sodium Sulfate, Sodium Bicarbonate, Lubricants, Butane, Potassium Bicarbonate, Potassium Sulfate, Heptane, Sodium Chloride, Sodium Chromate, Mineral Oil, Sodium Chlorate, Ammonium Chloride, Butadiene, Ferrous Chloride, Aluminum Chloride 20%, Acetylene, Water, Butylene, Calcium Chloride, Sulfuric Acid 10% to 75%, Barium Sulfate, Aluminum Sulfate, Formic Acid, Distilled, Potassium Chlorate, Carbon Disulfide, Cyclohexane, Cotton Seed Oil, Borax, Potassium Carbonate, Naphtha, Ferrous Sulfate, Potassium Chloride, Jet Fuel, Sulfuric Acid 1% to 10%, Antifreeze, Ferric Chloride, Turpentine, Ammonium Hydroxide, Sodium Thiosulphate, Salt, Mine, Fuel Oil, Alcohol, Zinc Chloride, Xylene, Barium Chloride, Stoddard Solvent, Hexane, Magnesium Sulfate, Potassium Permanganate, Aluminum Chloride, Tomato Juice |
| Discharge Diameter | 1 in |
| Discharge Standard | NPT |
| Best Efficiency Head | 32.5 ft |
| Port Connections | NPT |
| Discharge | 1 in NPT |
| Fluid Temperature Range | 32 Degrees F to 200 Degrees F |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Inlet Gender | Female |
| Number of Stages | 1 |
| Nameplate Voltage | 115/230V AC |
| Inlet Diameter | 1-1/2 in |
| Flow @ 40' Head | 30.8 gpm |
| Overall Width | 8 in |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Housing Material | Glass-Filled Polyphenylene |
| Pump Mounting Style | Base-Mounted |
| Flow @ 6' Head | 51 gpm |
| Priming | Manual |
| Mounting Location | Open Air |
| Best Efficiency Flow | 32.5 gpm |
| Max Specific Gravity | 1.1 |
| Pump Drive Configuration | Close-Coupled |
| Inlet Type | FNPT |
| Flow @ 18' Head | 43 gpm |
| Gasket Material | FKM |
| Motor Frame Size | 56C |
| Pump Design | End Suction |
| Hazardous Location Class | Not Rated |
| Flow @ 24' Head | 40 gpm |
| Freight Class Code | 260 |
| Pumping Application | Chemical Transfer |
| Contains California Prop 65 Carcinogen | Y |
| Discharge Gender | Male |
| Flow Rate (Maximum) | 53 gpm |
| Includes California Prop 65 Short-Form Warning | Y |
| Impeller Material | Carbon/Polyphenylene |
| Impeller Diameter | 3-3/4 in |
| Mounting Orientation | Horizontal |
| Storage Protection Code | A |
| Flow @ 50' Head | 21.6 gpm |
| Flow @ 9' Head | 46.5 gpm |
| Shaft Seal Type | Sealless |
| Drive Coupling Type | Magnetic Coupling |
| Shut Off Pressure - Maximum | 25.3 psi |
| Overall Height | 8.3 in |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Motor Enclosure | Totally Enclosed Fan Cooled |
| Inlet | 1-1/2 in FNPT |
| Motor Enclosure Type | TEFC |
| Safety Data Sheet (SDS) Applicable? | N |
| Inlet Standard | NPT |
| Feet of Head (Maximum) | 58.5 ft |
| Manufacturer Part Number | 587010 |
| Case Pressure - Maximum | 25.5 psi |
| Display Sell UOM | EA |
| Viscosity (Maximum) | 100 SUS |
| Frequency | 60 Hz |
| Flow @ 15' Head | 45 gpm |
| Min Ambient Temperature | 32 Degrees F |
| Suction Port | 1-1/2 in NPT |
| Mfr. Model # | 587010 |
Description
Magnt Drv Pmp, 1in, NPT, 3/4hp, Glss PPS