Magnetic Drive Pump: 1/12 hp HP, Single Phase, 115V AC, Glass-Filled Polypropylene, OAO
In Stock
$520.00
Save 21%
$412.62
/each
Earn 412 points for this item
($4.12 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
LITTLE GIANT Magnetic Drive Pump: 1/12 hp HP, Single Phase...
Mfr # 581503
$412.62
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2530 |
| Brand | LITTLE GIANT |
| Motor Frame Size | 3.3 |
| Safety Data Sheet (SDS) Applicable? | N |
| Flow @ 18' Head | 4.5 gpm |
| Display Qty | 1 |
| Flow @ 3' Head | 11.8 gpm |
| Motor Enclosure | Open Air Over |
| Inlet Standard | NPT |
| Feet of Head (Maximum) | 21.9 ft |
| Is this a Hazardous Material Product? | N |
| Bearing Type | Thrust |
| Pump Drive Configuration | Close-Coupled |
| Discharge Standard | NPT |
| Overall Width | 3.9 in |
| Discharge | 1/2 in NPT |
| Discharge Diameter | 1/2 in |
| Min Fluid Temperature | 32 Degrees F |
| Flow @ 9' Head | 10 gpm |
| Frequency | 60 Hz |
| Nameplate Voltage | 115V AC |
| Ozone Depleting Substance | N |
| Shut Off Pressure - Maximum | 9.5 psi |
| Housing Material | Glass-Filled Polypropylene |
| Contains California Prop 65 Carcinogen | Y |
| Horsepower (Maximum) | 1/12 hp |
| Drive Coupling Type | Magnetic Coupling |
| Flow @ 15' Head | 7 gpm |
| Overall Length | 9.8 in |
| Discharge Gender | Male |
| Flow Rate (Maximum) | 12.5 gpm |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Overall Height | 4.9 in |
| Manufacturers Warranty Length | 1 yr |
| Freight Class Code | 260 |
| Inlet Type | FNPT |
| Phase | Single |
| Shaft Seal Type | Sealless |
| Mounting Location | Open Air |
| Manufacturer Part Number | 581503 |
| Max Fluid Temperature | 150 Degrees F |
| Hazardous Location Class | Not Rated |
| Motor Design | Shaded Pole |
| Max Specific Gravity | 1.1 |
| Flow @ 6' Head | 11.1 gpm |
| Pump Mounting Style | Base-Mounted |
| Pumping Application | Chemical Transfer |
| Impeller Material | Polypropylene |
| Max Ambient Temperature | 77 Degrees F |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Fluid Temperature Range | 32 Degrees F to 150 Degrees F |
| Suction Port | 5/8 in NPT |
| Chemical Compatibility | Mercury, Boric Acid, Lactic Acid, Syrup, Ferric Sulfate, Barium Hydroxide, Rhodium Plating, Zinc Plating, Ammonium Sulfate, Acid, Salad Dressing, Diesel Fuel, Potassium Cyanide Solutions, Carbonic Acid, Glucose, Sodium Perborate, Dibasic, Magnesium Chloride, Magnesium Carbonate, Asphalt, Olive Oil, Nickel Chloride, Copper Cyanide, Sodium Sulfate, Gold Plating, Cod Liver Oil, Lead Acetate, Potassium Sulfate, Calcium Hydroxide, Sodium Chloride, Mineral Oil, Calcium Carbonate, Ammonium Chloride, Aluminum Chloride 20%, Mercuric Chloride, Amyl Alcohol, Nitrate, Calcium Chloride, Mayonnaise, Indium Sulfamate Plating, Detergents, Paraffin, Sodium Silicate, Varnish, Aluminum Potassium Sulfate, Nickel Plating, Urine, Potash, Potassium Chlorate, Shellac, Beet Sugar Liquids, Mercuric Cyanide, Wine, Borax, Milk, Ammonium Bifluoride, Potassium Bromide, Potassium Chloride, Magnesium Nitrate, Copper Sulfate, Lard, Catsup, Antifreeze, Corn Oil, Coffee, Ammonium Hydroxide, Mine, Salt, Fuel Oil, Zinc Chloride, Copper Nitrate, Barium Chloride, Carbonated Water, Barium Carbonate, Magnesium Sulfate, Whiskey, Plating Solutions, Copper Sulfate 5%, Cream, Carbon Monoxide, Silver Plating, Nickel Sulfate, Silicone Oil, Citric Oil, Copper Pyrophosphate, Sodium Bisulfate, Ethylene Glycol, Soap, Sodium Bisulfite, Clove Oil, Calcium Sulfate, Sodium Cyanide, Sodium Carbonate, Calcium Bisulfide, Ferric Nitrate, Mustard, Ammonia, Formaldehyde 40%, Magnesium Hydroxide, Aluminum Hydroxide, Calcium Hypochlorite, Calcium Bisulfite, Rosin, Coconut Oil, Potassium Dichromate, Zinc Sulfate, Rum, Sodium Bicarbonate, Lubricants, Potassium Bicarbonate, Iron Plating, Sodium Chromate, Linseed Oil, Ferrous Chloride, Acetic Anhydride, Honey, Water, Glycerin, Sea Water, Barium Sulfate, Oxalic Acid, Chocolate Syrup, Aluminum Sulfate, Distilled, Pulp Mill, Calgon, Soybean Oil, Gelatin, Cotton Seed Oil, Potassium Carbonate, Potassium Nitrate, Naphtha, Antimony Plating, Anhydrous, Ferrous Sulfate, Ammonium Persulfate, Stannic Chloride, Barium Sulfide, Copper Chloride, Arsenic Acid, Acetaldehyde, Sugar, Silicone, Ammonium Nitrate, Sodium Thiosulphate, Orange Oil, Fruit Juice, Alcohol, Ammonium Phosphate, Rust Inhibitors, Potassium Permanganate, Rosin Oil, Aluminum Chloride, Tomato Juice, Molasses, Tribasic |
| Inlet Gender | Female |
| Best Efficiency Flow | 8 gpm |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Cord Type | 3-conductor SJP |
| Display Sell UOM | EA |
| Case Pressure - Maximum | 9.5 psi |
| Motor Enclosure Type | OAO |
| Storage Protection Code | A |
| Full Load Current | 2.4 A |
| Cord Length | 6 ft |
| Mounting Orientation | Horizontal |
| Gasket Material | Buna-N |
| Best Efficiency Head | 14 ft |
| Number of Stages | 1 |
| Inlet | 5/8 in FNPT |
| Impeller Diameter | 1-83/100 in |
| Viscosity (Maximum) | 100 SUS |
| Min Ambient Temperature | 32 Degrees F |
| Priming | Manual |
| Includes California Prop 65 Short-Form Warning | Y |
| Port Connections | NPT |
| Inlet Diameter | 5/8 in |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Pump Design | End Suction |
| Mfr. Model # | 581503 |
Description
Magnt Drv Pmp, 1/2in, NPT, 1/12hp, Glss PP