Magnetic Drive Pump: 1/200 hp HP, Single Phase, 115V AC, Glass-Filled Polypropylene
In Stock
$260.50
Save 21%
$206.77
/each
Earn 206 points for this item
($2.06 for your next purchase!)
REGISTER NOW TO EARN!
ETA 5-7 BUSINESS DAYS
Request quantity discount pricing
You're Viewing
LITTLE GIANT Magnetic Drive Pump: 1/200 hp HP, Single Phas...
Mfr # 588001
$206.77
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2530 |
| Brand | LITTLE GIANT |
| Pump Design | End Suction |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Housing Material | Glass-Filled Polypropylene |
| Fluid Temperature Range | 32 Degrees F to 150 Degrees F |
| Mounting Orientation | Horizontal |
| Overall Length | 4.9 in |
| Ozone Depleting Substance | N |
| Discharge Gender | Male |
| Impeller Diameter | 1-37/200 in |
| Manufacturer Part Number | 588001 |
| Freight Class Code | 260 |
| Max Specific Gravity | 1.1 |
| Case Pressure - Maximum | 2.3 psi |
| Gasket Material | Buna-N |
| Nameplate Voltage | 115V AC |
| Frequency | 60 Hz |
| Phase | Single |
| Number of Stages | 1 |
| Shut Off Pressure - Maximum | 2.3 psi |
| Suction Port | 1/2 in Hose |
| Is this a Hazardous Material Product? | N |
| Overall Width | 2.4 in |
| Hazardous Location Class | Not Rated |
| Prop65_WarningMessage | Compliance_Prop65_Short_CancerandRepro |
| Drive Coupling Type | Magnetic Coupling |
| Pump Mounting Style | Base-Mounted |
| Full Load Current | 0.4 A |
| Inlet Gender | Female |
| Inlet Standard | Hose |
| Cord Type | Stripped Leads |
| Discharge Diameter | 1/2 in |
| Display Qty | 1 |
| Motor Enclosure | Open Air Over |
| Best Efficiency Head | 3.5 ft |
| Inlet Diameter | 1/2 in |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Safety Data Sheet (SDS) Applicable? | N |
| Max Fluid Temperature | 150 Degrees F |
| Feet of Head (Maximum) | 5.4 ft |
| Horsepower (Maximum) | 1/200 hp |
| Contains California Prop 65 Carcinogen | Y |
| Pump Drive Configuration | Close-Coupled |
| Viscosity (Maximum) | 100 SUS |
| Mounting Location | Open Air |
| Chemical Compatibility | Nitric Acid 10% Solution, Mercury, Plating Solutions, Boric Acid, Copper Sulfate 5%, Lactic Acid, Acetic Acid 80%, Sodium Sulfide, Barium Hydroxide, Naphthalene, Tannic Acid, Ammonium Carbonate, Silver Plating, Nickel Sulfate, Fatty Acids, Hydrocyanic Acid, Copper Pyrophosphate, Potassium Cyanide Solutions, Ethylene Glycol, Soap, Vinegar, Carbonic Acid, Glucose, Calcium Sulfate, Dibasic, Sodium Carbonate, Magnesium Chloride, Calcium Bisulfide, Iodine, Aniline Oil, Magnesium Hydroxide, Aluminum Hydroxide, Olive Oil, Calcium Bisulfite, Nickel Chloride, Potassium Dichromate, Zinc Sulfate, Silver Nitrate, Copper Cyanide, Sodium Sulfate, Sodium Bicarbonate, Ethylene Dichloride, Gold Plating, Lubricants, Acetic Acid 20%, Potassium Sulfate, Calcium Hydroxide, Sodium Chromate, Calcium Carbonate, Tartaric Acid, Amyl Alcohol, Water, Mayonnaise, Citric Acid, Tanning Liquors, Glycerin, Paraffin, Sodium Silicate, Varnish, Ammonia 10%, Barium Sulfate, Oxalic Acid, Formic Acid, Aluminum Potassium Sulfate, Distilled, Pulp Mill, Hydrogen Peroxide, Potassium Chlorate, Gelatin, Beet Sugar Liquids, Cotton Seed Oil, Potassium Nitrate, Borax, Wine, Naphtha, Sulfurous Acid, Antimony Plating, Potassium Chloride, Magnesium Nitrate, Barium Sulfide, Arsenic Acid, Antifreeze, Chromic Acid 50%, Turpentine, Coffee, Sugar, Ammonium Hydroxide, Sodium Thiosulphate, Fuel Oil, Orange Oil, Alcohol, Zinc Chloride, Ammonium Phosphate, Barium Chloride, Copper Nitrate, Barium Carbonate, Magnesium Sulfate, Potassium Permanganate, Whiskey, Tetrachloroethane, Tomato Juice, Tribasic |
| Manufacturers Warranty Length | 1 yr |
| Display Sell UOM | EA |
| Storage Protection Code | A |
| Cord Length | 6 ft |
| Flow Rate (Maximum) | 2.7 gpm |
| Max Ambient Temperature | 77 Degrees F |
| Min Fluid Temperature | 32 Degrees F |
| Discharge Standard | Hose |
| Port Connections | GHT |
| Shaft Seal Type | Sealless |
| Flow @ 3' Head | 1.7 gpm |
| Pumping Application | Chemical Transfer |
| Motor Design | Shaded Pole |
| Min Ambient Temperature | 32 Degrees F |
| Inlet | 1/2 in GHT |
| Inlet Type | GHT |
| Motor Enclosure Type | OAO |
| Impeller Material | Polypropylene |
| Overall Height | 3.7 in |
| Priming | Manual |
| Hazmat_Message | Compliance_Hazmat_ExcGeneral |
| Includes California Prop 65 Short-Form Warning | Y |
| Discharge | 1/2 in Hose |
| Best Efficiency Flow | 1.5 gpm |
| Mfr. Model # | 588001 |
Description
Magnt Drv Pmp, 1/2in, Hose, 1/200hp, Glss PP