Polyethylene Sheet: 0.25 in Thick, 24 in x 24 in, Opaque, Black, 4, 000 psi Tensile Strength
In Stock
$73.80
/each
Earn 73 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.25 in Thick, 24 in x 24...
Item 2NHX1
$73.80
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Elongation | 270 % |
| Plastic Length | 24 in |
| Material | UHMW Polyethylene |
| Impact Strength | No Break |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Rockwell Hardness | 60 HRM |
| Maximum Temperature | 180 Degrees F |
| Flexural Modulus | 400 MPa |
| Standards | Not Rated |
| Plastic Width | 24 in |
| Tensile Strength | 4,000 psi |
| Static-Resistant | Not Static-Resistant |
| Friction Coefficient | 0.14 |
| Metal Detectable | Not Metal Detectable |
| Minimum Temperature | -22 Degrees F |
| Dielectric Strength | 86 kV/mm |
| Scratch-Resistant | Not Scratch-Resistant |
| Color | Black |
| UV-Resistant | Not UV-Resistant |
| Coefficient of Thermal Expansion | Not Rated |
| Plastic Thickness | 0.25 in |
| Plastic Clarity | Opaque |
| Shore Hardness | 67 Shore D |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Wear Rate | Not Rated |
| Backing Type | No Backing |
| Machinability | 100 % |
| Water Absorption | 0.01 % |
| Mfr. Model # | PS-UHMW-RCY-4 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 24 in, Plastic Width 24 in, Plastic Thickness 0.25 in, Black, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.033 lb/cu in, Plastic Hardness 67D