Polyethylene Sheet: 0.25 in Thick, 12 in x 12 in, Opaque, Black, 4, 000 psi Tensile Strength
In Stock
$17.04
/each
Earn 17 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.25 in Thick, 12 in x 12...
Item 2NHV4
$17.04
Customers Also Viewed
No related products found.
Product Details
| Brand | APPROVED VENDOR |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Backing Type | No Backing |
| Metal Detectable | Not Metal Detectable |
| Shore Hardness | 67 Shore D |
| Minimum Temperature | -22 Degrees F |
| Elongation | 270 % |
| Coefficient of Thermal Expansion | Not Rated |
| Material | UHMW Polyethylene |
| Standards | Not Rated |
| Friction Coefficient | 0.14 |
| Machinability | 100 % |
| Plastic Thickness | 0.25 in |
| Scratch-Resistant | Not Scratch-Resistant |
| Tensile Strength | 4,000 psi |
| Water Absorption | 0.01 % |
| Dielectric Strength | 86 kV/mm |
| Plastic Clarity | Opaque |
| Color | Black |
| Maximum Temperature | 180 Degrees F |
| Plastic Width | 12 in |
| Rockwell Hardness | 60 HRM |
| Static-Resistant | Not Static-Resistant |
| Plastic Length | 12 in |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| UV-Resistant | Not UV-Resistant |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Wear Rate | Not Rated |
| Impact Strength | No Break |
| Flexural Modulus | 400 MPa |
| Mfr. Model # | PS-UHMW-RCY-1 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Standard, Plastic Length 12 in, Plastic Width 12 in, Plastic Thickness 0.25 in, Black, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength No Break, Friction Coefficient 0.14, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.033 lb/cu in, Plastic Hardness 67D