Polyethylene Sheet: 0.25 in Thick, 4 ft x 10 ft, Opaque, Gray, 5, 100 psi Tensile Strength, No Break
In Stock
$1,421.00
/each
Earn 1421 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR Polyethylene Sheet: 0.25 in Thick, 4 ft x 10...
Item 2NHV1
$1,421.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2094 |
| Brand | APPROVED VENDOR |
| Backing Type | No Backing |
| Impact Strength Rating | Excellent (5.6+ ft·lb/in to No Break) |
| Static-Resistant | Static-Resistant |
| Friction Coefficient | 0.08 |
| Coefficient of Thermal Expansion | Not Rated |
| Color | Gray |
| Temperature Range | -22 Degrees F to 180 Degrees F |
| Metal Detectable | Not Metal Detectable |
| Tensile Strength | 5,100 psi |
| Material | UHMW Polyethylene |
| Water Absorption | 0.01 % |
| Scratch-Resistant | Not Scratch-Resistant |
| Dielectric Strength | 90.6 kV/mm |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Flexural Modulus | 400 MPa |
| Rockwell Hardness | 35 HRM |
| Shore Hardness | 65 Shore D |
| Wear Rate | Not Rated |
| Minimum Temperature | -22 Degrees F |
| Plastic Clarity | Opaque |
| Plastic Thickness | 0.25 in |
| Plastic Width | 4 ft |
| Impact Strength | No Break |
| Elongation | 280 % |
| Maximum Temperature | 180 Degrees F |
| Tensile Strength Rating | Good (5,000 to 9,999 psi) |
| Filler Material | Oil |
| Standards | Not Rated |
| UV-Resistant | Not UV-Resistant |
| Machinability | 100 % |
| Plastic Length | 10 ft |
| Mfr. Model # | PS-UHMW-OF-76 |
| Country of Origin | China (subject to change) |
| UNSPSC | 30102515 |
Description
Polyethylene Sheet, UHMW Polyethylene, Grade Antistatic, Plastic Length 10 ft, Plastic Width 4 ft, Plastic Thickness 0.25 in, Gray, Plastic Clarity Opaque, Tensile Strength 5,100 psi, Impact Strength No Break, Friction Coefficient 0.08, Water Absorption 0.01 Percent, Temperature Range -22 Degrees to 180 Degrees F, Plastic Density 0.034 lb/cu in, Plastic Hardness 64D