Motion Control Coupling: 3° Angular Misalignment, 1/2 in Bore Dia 1, Inch, 1
In Stock
$167.50
/each
Earn 167 points with this purchase
Request quantity discount pricing
You're Viewing
RULAND MANUFACTURING Motion Control Coupling: 3° Angular Misalignm...
Item KD-0970644
$167.50
Customers Also Viewed
No related products found.
Product Details
| Brand | RULAND MANUFACTURING |
| For Environment | Parallel Misalignment, Angular Misalignment, Axial Motion |
| Length Through Bore 2 | 0.8 in |
| Angular Misalignment | 3 Degrees |
| Axial Motion | 0.01 in |
| Minimum Operating Temperature | -40 Degrees F |
| System of Measurement | Inch |
| Bore Diameter 2 | 1/2 in |
| For Shaft Type | Round |
| Diff. Bore Sizes | Same Bore Dimensions |
| Coupling Material Finish | Bright |
| Different Bore Sizes | No |
| Shaft Locking Type | Clamp On |
| Maximum Operating Temperature | 225 Degrees F |
| Included Screws | (2) Hex Socket Cap Screw |
| For Misalignment Type | Parallel, Axial, Angular |
| Dynamic Torque Non-Reversing | 25 lb-in |
| Number of Beams | 6 |
| Display Qty | 1 |
| Fastener Tightening Torque | 9.5 N-m |
| Application | Servo Motors to Lead Screws, Light-Duty Power Transmission |
| Contains California Prop 65 Carcinogen | Y |
| Length Through Bore 1 | 0.8 in |
| Features | Balanced Design for Reduced Vibration, Machined from a Single Piece of Material, Higher Torque Capacity, Lower Windup, Larger Body Sizes than Single or Four Beam Couplings, Spiral Coupling With Nypatch Anti-Vibration Hardware, Zero-Backlash, Two Sets of Three Spiral Cuts |
| Bore Tolerance | +0.001/-0.000 in |
| Maximum Speed | 6,000 RPM |
| Number of Locking Screws | 2 |
| Shaft Tolerance | +0.0000/-0.0005 in |
| Coupling Outside Diameter | 1-1/4 in |
| Bore Diameter 1 | 1/2 in |
| Screw Material Finish | Black Oxide |
| Standards | REACH Compliant, DIN 912 12.9 Screws, RoHS Compliant, Conflict Minerals Compliant |
| Contains California Prop 65 Reproductive Toxicant | Y |
| Bore Type | Round |
| Coupling Material | Aluminum |
| Screw Thread Size | M5 |
| Full Bearing Support Required | Yes |
| Manufacturer Part Number | FCR20-8-8-A |
| Dynamic Torque Reversing | 12.5 lb-in |
| Coupling Material Grade | 7075 |
| Torsional Stiffness | 13.89 in-lb/Deg |
| Maximum Torque | 50 in-lb |
| Moment of Inertia | 0.0401 lb-in sq |
| Screw Material | Alloy Steel with Nypatch |
| Parallel Misalignment | 0.015 in |
| Zero Backlash | Yes |
| Overall Length | 1-3/4 in |
| Includes California Prop 65 Short-Form Warning | Y |
| Mfr. Model # | FCR20-8-8-A |
Description
MotionControl Coupling, Clamp, 1/2"x1/2"