Booster Pump: 2 hp, Single Phase, 115/230V AC, 37 gpm Best Efficiency Flow, ODP
In Stock
$3,591.00
Save 20%
$2,858.44
/each
Earn 2858 points for this item
($28.58 for your next purchase!)
REGISTER NOW TO EARN!
1 day
Request quantity discount pricing
You're Viewing
FLINT & WALLING Booster Pump: 2 hp, Single Phase, 115/230V AC...
Mfr # CJ101B201AB
$2,858.44
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2532 |
| Brand | FLINT & WALLING |
| Horsepower | 2 hp |
| Pressure Boost - Maximum | 95 psi |
| Seal Material | Buna-N/Carbon/Silicon Carbide/Stainless Steel |
| Series | CJ |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| NSF Certifications for Food and Drinking Water | NSF 372 |
| Safety Data Sheet (SDS) Applicable? | N |
| Media Temperature (Minimum) | 34 Degrees F |
| Inlet Gender | Female |
| Flow Rate - Maximum | 51 gpm |
| Includes | 1/4 in Tap and Plug for Pressure Switch Application, 1/4 in Vacuum Tapping, 1/4 in Drain Plug |
| Display Qty | 1 |
| Manufacturer Warranty Length | 1 yr |
| Motor Enclosure | ODP |
| Overall Height | 9.25 in |
| Best Efficiency Flow | 37 gpm |
| Flow Rate @ 20 psi | 50 gpm |
| Overall Width | 7 in |
| Flow Rate @ 50 psi | 48 gpm |
| Storage Protection Code | A |
| Number of Stages | 2 |
| Full Load Current | 25/12.5 A |
| Compatible Discharge Pipe Size | 1-1/4 in |
| Discharge Gender | Female |
| Nameplate Voltage | 115/230V AC |
| Shut Off Pressure - Maximum | 70 psi |
| Case Pressure - Maximum | 160 psi |
| Pump Technology | Centrifugal |
| Contains California Prop 65 Carcinogen | N |
| Priming | Manual |
| Electrical Connection Type | Hardwired |
| Mounting Orientation | Horizontal |
| Freight Class Code | 197 |
| Discharge Diameter | 1-1/4 in |
| Inlet | 1-1/2 in FNPT |
| Motor Frame Designation | 56J |
| Should Sales be Restricted by Region? | N |
| Discharge Standard | NPT |
| Revolutions per Minute - Maximum | 3,450 RPM |
| Feet of Head - Maximum | 160 ft |
| Pump Casing Material | Cast Iron |
| Media Temp. Range | 34 Degrees F to 200 Degrees F |
| Solids Diameter - Maximum | 0 in |
| Nominal Voltage | 120/240V AC |
| Flow Rate - Minimum | 2 gpm |
| Feet of Head - Minimum | 24 ft |
| Installation | Floor Standing |
| Standards | CSAus Listed |
| Is this a Hazardous Material Product? | N |
| Low Lead Compliance Level | CE |
| Manufacturer Part Number | CJ101B201AB |
| Inlet Diameter | 1-1/2 in |
| Motor Ambient Temperature (Minimum) | 32 Degrees F |
| Product Powered by Fossil Fuel | N |
| Best Efficiency Head | 115 ft |
| Inlet Type | FNPT |
| Compatible Intake Pipe Size | 1-1/2 in |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Flow Rate @ 60 psi | 27 gpm |
| Duty Cycle | Continuous |
| Suction Lift - Maximum | 25 ft |
| Impeller Design | Closed |
| Overall Length | 19.5 in |
| Motor Design | Capacitor-Start |
| Phase | Single |
| Media Temperature - Maximum | 200 Degrees F |
| Motor Enclosure Design | Open Drip Proof |
| Inlet Standard | NPT |
| Flow Rate @ 30 psi | 48 gpm |
| Contains California Prop 65 Reproductive Toxicant | N |
| Display Sell UOM | EA |
| Frequency | 60 Hz |
| LowLead_WarningMessage | Compliance_LowLead_Certified |
| For Water System Type | Non-Potable Water |
| Power Source | Corded Electric |
| Discharge Type | FNPT |
| Impeller Material | Brass |
| Flow Rate @ 40 psi | 42 gpm |
| Discharge | 1-1/4 in FNPT |
| For Media Type | Clear Water |
| Ozone Depleting Substance | N |
| For Use With Potable Systems | No |
| Application | Boosting, Circulating |
| Thermal Protection | Auto |
| Mfr. Model # | CJ101B201AB |
Description
Booster Pump, 2 hp, 115/230V AC