Booster Pump: 2 hp, Single Phase, 115/230V AC, 27 gpm Best Efficiency Flow, ODP
In Stock
$1,367.00
Save 11%
$1,217.15
/each
Earn 1217 points for this item
($12.17 for your next purchase!)
REGISTER NOW TO EARN!
Request quantity discount pricing
You're Viewing
FLINT & WALLING Booster Pump: 2 hp, Single Phase, 115/230V AC...
Mfr # PB2711A201
$1,217.15
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2532 |
| Brand | FLINT & WALLING |
| Contains California Prop 65 Reproductive Toxicant | N |
| Inlet Gender | Female |
| Number of Stages | 11 |
| Manufacturer Warranty Length | 1 yr |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| Electrical Connection Type | Hardwired |
| Pressure Boost - Maximum | 216 psi |
| Discharge Gender | Female |
| Media Temp. Range | 34 Degrees F to 140 Degrees F |
| Flow Rate @ 50 psi | 31 gpm |
| Power Source | Corded Electric |
| Pump Technology | Centrifugal |
| Freight Class Code | 39 |
| Is this a Hazardous Material Product? | N |
| Nominal Voltage | 120/240V AC |
| Contains California Prop 65 Carcinogen | N |
| Priming | Manual |
| Display Qty | 1 |
| Flow Rate @ 20 psi | 34 gpm |
| Ozone Depleting Substance | N |
| Product Powered by Fossil Fuel | N |
| Installation | Floor Standing |
| Nameplate Voltage | 115/230V AC |
| Horsepower | 2 hp |
| For Use With Potable Systems | No |
| Case Pressure - Maximum | 300 psi |
| Impeller Design | Closed |
| Flow Rate @ 60 psi | 29.5 gpm |
| Flow Rate @ 80 psi | 27.1 gpm |
| LowLead_WarningMessage | Compliance_LowLead_Certified |
| Discharge | 1 in FNPT |
| Flow Rate @ 100 psi | 24.2 gpm |
| Inlet Diameter | 1 in |
| Discharge Standard | NPT |
| Overall Height | 9 in |
| Storage Protection Code | A |
| Thermal Protection | Auto |
| Motor Design | Capacitor-Start |
| Low Lead Compliance Level | CE |
| Display Sell UOM | EA |
| Seal Material | Buna-N/Carbon/Ceramic/Stainless Steel |
| Includes | Kit, Vertical Motor Cover |
| Series | PB |
| Feet of Head - Maximum | 337 ft |
| Suction Lift - Maximum | 0 ft |
| Flow Rate - Maximum | 42 gpm |
| Standards | CSAus Certified |
| Discharge Type | FNPT |
| Inlet Type | FNPT |
| Discharge Diameter | 1 in |
| Frequency | 60 Hz |
| Media Temperature - Maximum | 140 Degrees F |
| Overall Length | 27.5 in |
| Flow Rate - Minimum | 2 gpm |
| For Media Type | Clear Water |
| Flow Rate @ 140 psi | 13 gpm |
| Impeller Material | Noryl |
| Motor Enclosure Design | Open Drip Proof |
| Inlet | 1 in FNPT |
| Overall Width | 6.5 in |
| For Water System Type | Non-Potable Water |
| Motor Frame Designation | 56J |
| Should Sales be Restricted by Region? | N |
| Inlet Standard | NPT |
| Application | Boosting |
| Solids Diameter - Maximum | 0 in |
| Motor Enclosure | ODP |
| Mounting Orientation | Horizontal |
| Flow Rate @ 90 psi | 25 gpm |
| Media Temperature (Minimum) | 34 Degrees F |
| Flow Rate @ 120 psi | 20.3 gpm |
| Full Load Current | 25/12.5 A |
| Manufacturer Part Number | PB2711A201 |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Phase | Single |
| Safety Data Sheet (SDS) Applicable? | N |
| Flow Rate @ 30 psi | 32.5 gpm |
| Flow Rate @ 40 psi | 31.5 gpm |
| Best Efficiency Head | 194 ft |
| Duty Cycle | Continuous |
| Compatible Intake Pipe Size | 1 in |
| Motor Ambient Temperature (Minimum) | 32 Degrees F |
| Compatible Discharge Pipe Size | 1 in |
| Flow Rate @ 70 psi | 27.5 gpm |
| Pump Casing Material | Cast Iron |
| Revolutions per Minute - Maximum | 3,450 RPM |
| Flow Rate @ 15 psi | 33 gpm |
| NSF Certifications for Food and Drinking Water | NSF 372 |
| Best Efficiency Flow | 27 gpm |
| Shut Off Pressure - Maximum | 147 psi |
| Mfr. Model # | PB2711A201 |
Description
Booster Pump, 2 hp, 115/230V AC