Booster Pump: 1 hp, Single Phase, 115/230V AC, 10 gpm Best Efficiency Flow, ODP
In Stock
$1,159.00
/each
Earn 1159 points with this purchase
Request quantity discount pricing
You're Viewing
FLINT & WALLING Booster Pump: 1 hp, Single Phase, 115/230V AC...
Item KD-0801675
$1,159.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2532 |
| Brand | FLINT & WALLING |
| Manufacturer Warranty Length | 1 yr |
| Overall Width | 6.5 in |
| Number of Stages | 14 |
| Best Efficiency Flow | 10 gpm |
| Solids Diameter - Maximum | 0 in |
| Nameplate Voltage | 115/230V AC |
| Flow Rate @ 90 psi | 11.5 gpm |
| Includes | Kit, Vertical Motor Cover |
| Flow Rate @ 15 psi | 15 gpm |
| Phase | Single |
| Electrical Connection Type | Hardwired |
| Shut Off Pressure - Maximum | 183 psi |
| Compatible Intake Pipe Size | 3/4 in |
| Application | Boosting |
| Flow Rate @ 20 psi | 15.5 gpm |
| Motor Enclosure Design | Open Drip Proof |
| Flow Rate @ 60 psi | 13.4 gpm |
| Flow Rate @ 70 psi | 13 gpm |
| Inlet Gender | Female |
| Flow Rate @ 30 psi | 15 gpm |
| Flow Rate @ 100 psi | 11.2 gpm |
| Inlet Diameter | 3/4 in |
| Impeller Design | Closed |
| Motor Frame Designation | 56J |
| Standards | CSAus Certified |
| Series | PB |
| Priming | Manual |
| Horsepower | 1 hp |
| Seal Material | Buna-N/Carbon/Ceramic/Stainless Steel |
| Discharge Standard | NPT |
| Media Temp. Range | 34 Degrees F to 140 Degrees F |
| Feet of Head - Maximum | 425 ft |
| Discharge Gender | Female |
| Manufacturer Part Number | PB1014A101 |
| Flow Rate @ 120 psi | 9.8 gpm |
| Flow Rate @ 160 psi | 6 gpm |
| Case Pressure - Maximum | 300 psi |
| Media Temperature (Minimum) | 34 Degrees F |
| Motor Enclosure | ODP |
| Overall Height | 9 in |
| Nominal Voltage | 120/240V AC |
| Compatible Discharge Pipe Size | 3/4 in |
| Flow Rate @ 80 psi | 12.3 gpm |
| Pressure Boost - Maximum | 216 psi |
| Contains California Prop 65 Reproductive Toxicant | N |
| NSF Certifications for Food and Drinking Water | NSF 372 |
| Suction Lift - Maximum | 0 ft |
| Flow Rate - Minimum | 2 gpm |
| Revolutions per Minute - Maximum | 3,450 RPM |
| Motor Design | Capacitor-Start |
| Discharge Diameter | 3/4 in |
| Discharge Type | FNPT |
| Overall Length | 27.25 in |
| Best Efficiency Head | 270 ft |
| Flow Rate @ 140 psi | 8.3 gpm |
| Duty Cycle | Continuous |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| Full Load Current | 18/9 A |
| Motor Ambient Temperature (Minimum) | 32 Degrees F |
| Mounting Orientation | Horizontal |
| Flow Rate @ 40 psi | 14.5 gpm |
| Inlet | 3/4 in FNPT |
| For Use With Potable Systems | No |
| For Media Type | Clear Water |
| Installation | Floor Standing |
| For Water System Type | Non-Potable Water |
| Impeller Material | Noryl |
| Flow Rate @ 50 psi | 14 gpm |
| Pump Casing Material | Cast Iron |
| Thermal Protection | Auto |
| Flow Rate @ 180 psi | 2.3 gpm |
| Inlet Type | FNPT |
| Flow Rate - Maximum | 42 gpm |
| Contains California Prop 65 Carcinogen | N |
| Pump Technology | Centrifugal |
| Display Qty | 1 |
| Power Source | Corded Electric |
| Discharge | 3/4 in FNPT |
| Frequency | 60 Hz |
| Display Sell UOM | EA |
| Media Temperature - Maximum | 140 Degrees F |
| Inlet Standard | NPT |
| Mfr. Model # | PB1014A101 |
Description
Booster Pump, 1 hp, 115/230V AC