Booster Pump: 1/2 hp, Single Phase, 115/230V AC, 5 gpm Best Efficiency Flow, ODP
In Stock
$847.50
/each
Earn 847 points with this purchase
Request quantity discount pricing
You're Viewing
FLINT & WALLING Booster Pump: 1/2 hp, Single Phase, 115/230V...
Item KD-0801691
$847.50
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2532 |
| Brand | FLINT & WALLING |
| Discharge Type | FNPT |
| Should Sales be Restricted by Region? | N |
| Discharge Gender | Female |
| Flow Rate @ 30 psi | 9 gpm |
| Electrical Connection Type | Hardwired |
| NSF Certifications for Food and Drinking Water | NSF 372 |
| Storage Protection Code | A |
| Discharge Standard | NPT |
| Horsepower | 1/2 hp |
| Inlet Standard | NPT |
| Low Lead Compliance Level | CE |
| Compatible Discharge Pipe Size | 3/4 in |
| Contains California Prop 65 Reproductive Toxicant | N |
| Contains California Prop 65 Carcinogen | N |
| Impeller Design | Closed |
| Manufacturer Part Number | PB0512A051 |
| Thermal Protection | Auto |
| Overall Width | 6.5 in |
| Case Pressure - Maximum | 300 psi |
| Feet of Head - Maximum | 308 ft |
| Flow Rate @ 15 psi | 9.8 gpm |
| Flow Rate @ 40 psi | 8.3 gpm |
| For Water System Type | Non-Potable Water |
| Suction Lift - Maximum | 0 ft |
| Flow Rate @ 120 psi | 2.3 gpm |
| Motor Frame Designation | 56J |
| Duty Cycle | Continuous |
| LowLead_WarningMessage | Compliance_LowLead_Certified |
| Priming | Manual |
| Product Powered by Fossil Fuel | N |
| Display Qty | 1 |
| Flow Rate @ 80 psi | 6 gpm |
| Overall Length | 23.38 in |
| Ozone Depleting Substance | N |
| Nominal Voltage | 120/240V AC |
| Nameplate Voltage | 115/230V AC |
| Pressure Boost - Maximum | 216 psi |
| Standards | CSAus Certified |
| For Use With Potable Systems | No |
| Inlet Gender | Female |
| Discharge Diameter | 3/4 in |
| For Media Type | Clear Water |
| Best Efficiency Head | 210 ft |
| Pump Casing Material | Cast Iron |
| Flow Rate @ 100 psi | 4.5 gpm |
| Seal Material | Buna-N/Carbon/Ceramic/Stainless Steel |
| Best Efficiency Flow | 5 gpm |
| Compatible Intake Pipe Size | 3/4 in |
| Inlet | 3/4 in FNPT |
| Motor Ambient Temperature (Minimum) | 32 Degrees F |
| Inlet Diameter | 3/4 in |
| Overall Height | 9 in |
| Full Load Current | 13/6.5 A |
| Motor Design | Capacitor-Start |
| Series | PB |
| Impeller Material | Noryl |
| Media Temp. Range | 34 Degrees F to 140 Degrees F |
| Freight Class Code | 39 |
| Motor Ambient Temperature (Maximum) | 149 Degrees F |
| Power Source | Corded Electric |
| Flow Rate @ 70 psi | 6.5 gpm |
| Flow Rate @ 20 psi | 9.5 gpm |
| Media Temperature - Maximum | 140 Degrees F |
| Includes | Kit, Vertical Motor Cover |
| Installation | Floor Standing |
| Is this a Hazardous Material Product? | N |
| Motor Enclosure | ODP |
| Flow Rate - Minimum | 2 gpm |
| Application | Boosting |
| Flow Rate @ 10 psi | 10 gpm |
| Display Sell UOM | EA |
| Flow Rate @ 50 psi | 7.6 gpm |
| Phase | Single |
| Pump Technology | Centrifugal |
| Safety Data Sheet (SDS) Applicable? | N |
| Manufacturer Warranty Length | 1 yr |
| Frequency | 60 Hz |
| Flow Rate @ 90 psi | 5.5 gpm |
| Flow Rate @ 60 psi | 7.1 gpm |
| Motor Enclosure Design | Open Drip Proof |
| Shut Off Pressure - Maximum | 132 psi |
| Revolutions per Minute - Maximum | 3,450 RPM |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Flow Rate - Maximum | 42 gpm |
| Inlet Type | FNPT |
| Mounting Orientation | Horizontal |
| Discharge | 3/4 in FNPT |
| Solids Diameter - Maximum | 0 in |
| Media Temperature (Minimum) | 34 Degrees F |
| Number of Stages | 12 |
| Mfr. Model # | PB0512A051 |
Description
Booster Pump, 1/2 hp, 115/230V AC