Split Lock Washer: Case Hardened, Hot-Dipped Galvanized, Steel, 1/2 in Screw Sz, 25 PK
In Stock
$4.04
/each
Earn 4 points with this purchase
Request quantity discount pricing
You're Viewing
APPROVED VENDOR Split Lock Washer: Case Hardened, Hot-Dipped...
Item KD-0751736
$4.04
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2002 |
| Brand | APPROVED VENDOR |
| Inside Diameter Tolerance | +/-0.005 in |
| Removable | Removable |
| California Prop 65 Cancer | N |
| Material Type | Steel |
| Product Powered by Fossil Fuel | N |
| Dimensional Standards | ASME B18.21.1 |
| Manufacturer Part Number | U37025.050.0001 |
| Thickness Tolerance | +/-0.005 in |
| For Screw Size | 1/2 in |
| Rockwell Hardness | 38 HRC |
| Display Sell UOM | PK |
| Pack Size | Small Pack |
| Material Grade | Case Hardened |
| Finish | Hot-Dipped Galvanized |
| Washer Sub Type | Regular |
| Inside Diameter - Maximum | 33/64 in |
| Freight Class Code | 18 |
| Is this a Hazardous Material Product? | N |
| Made in North America | Not Made in North America |
| Ozone Depleting Substance | N |
| Section Width - Minimum | 11/64 in |
| Minimum Temperature | 10 Degrees F |
| Product Type | Split Lock Washer |
| Color | Silver |
| Min. Inside Diameter | 1/2 in |
| California Prop 65 Reproductive Harm | N |
| Material Grade/Class | Case Hardened |
| Thickness Range | 1/8 in to 1/8 in |
| Should Sales be Restricted by Region? | N |
| Type | Split Lock Washer |
| Maximum Thickness | 1/8 in |
| RoHS - Restricted Use of Hazardous Substances Directive (RoHS) | N |
| Maximum Temperature | 275 Degrees F |
| Finish Type | Hot-Dipped Galvanized |
| System of Measurement | Inch |
| Safety Data Sheet (SDS) Applicable? | N |
| Storage Protection Code | A |
| Outside Diameter Tolerance | +/-0.01 in |
| Material | Steel |
| Bolt Compatibility | Grade 5 |
| Washer Type CA | Split Lock Washer - Regular |
| Washer Type | Regular, Split Lock |
| EnvironmentallyPreferable_Indicator | N |
| Bearing Width - Minimum | 1/8 in |
| Display Qty | 25 |
| Material Quality Standards | ASTM A307A, SAE J429 |
| Outside Diameter - Maximum | 7/8 in |
| Minimum Thickness | 1/8 in |
| Mfr. Model # | U37025.050.0001 |
Description
Split Lock Washer, 1/2 in, PK25