HDPE Sheet: 0.5 in Thick, 12 in x 24 in, Opaque, Off-White, 4, 000 psi Tensile Strength
In Stock
$37.20
/each
Earn 37 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
APPROVED VENDOR HDPE Sheet: 0.5 in Thick, 12 in x 24 in, Opaq...
Item 22JM75
$37.20
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2095 |
| Brand | APPROVED VENDOR |
| Light Transmission | 90 % |
| Material | HDPE |
| Dielectric Strength | 50 kV/mm |
| Friction Coefficient | 0.22 |
| Impact Strength | 1.94 ft-lb/in |
| Machinability | 80 % |
| Maximum Adhesive Temperature | 203 Degrees F |
| Rockwell Hardness | 64 HRM |
| Water Absorption Rating | Excellent (0% to 0.05%) |
| Temperature Range | -40 Degrees F to 180 Degrees F |
| Flexural Modulus | 174 ksi |
| Minimum Adhesive Temperature | 70 Degrees F |
| FDA Compliance | 21 CFR 177.1520 |
| Water Absorption | 0.01 % |
| Tensile Strength | 4,000 psi |
| Tensile Strength Rating | Poor (0 to 4,999 psi ) |
| Fabrication | Extruded |
| Scratch-Resistant | Scratch-Resistant |
| Minimum Temperature | -40 Degrees F |
| Coefficient of Thermal Expansion | 0.55 x 10^-5 in/in/ Degrees F |
| Standards | FDA, NSF, USDA, ASTM 2239 |
| Maximum Temperature | 180 Degrees F |
| Static-Resistant | Not Static-Resistant |
| Plastic Length | 24 in |
| Wear Rate | 6.53 x 10^-6 cu mm/N-m |
| Metal Detectable | Not Metal Detectable |
| Shore Hardness | 70 Shore D |
| Color | Off-White |
| Plastic Thickness | 0.5 in |
| UV-Resistant | UV-Resistant |
| Plastic Width | 12 in |
| Plastic Clarity | Opaque |
| Mfr. Model # | 22JM75 |
| Country of Origin | USA (subject to change) |
| UNSPSC | 52151606 |
Description
HDPE Sheet, HDPE, Grade Standard, Plastic Length 24 in, Plastic Width 12 in, Plastic Thickness 0.5 in, Off-White, Plastic Clarity Opaque, Tensile Strength 4,000 psi, Impact Strength 1.94 ft-lb/in, Friction Coefficient 0.22, Water Absorption 0.01 Percent, Temperature Range -100 Degrees to 180 Degrees F, Plastic Density 0.93 g/cc, Plastic Hardness 64D