Grinder Pump: Vertical, Single Phase, 1 hp, 115V AC, 44 gpm @ 10' of Head, 2 in FNPT
In Stock
$1,437.00
/each
Earn 1437 points with this purchase
Request quantity discount pricing
Compliance & Restrictions
Hazardous Material
Contains hazardous waste materials
You're Viewing
LIBERTY PUMPS Grinder Pump: Vertical, Single Phase, 1 hp, 1...
Item 21TN69
$1,437.00
Customers Also Viewed
No related products found.
Product Details
| Catalog Page | 2509 |
| Brand | LIBERTY PUMPS |
| Frequency | 60 Hz |
| Motor Housing Material | Cast Iron |
| Power Source | Corded Electric |
| Shaft Seal Material | Silicon Carbide |
| Switch Electrical Connection | Piggyback |
| Sump Pit Diameter - Minimum | 24 in |
| Phase | Single |
| For Media Type | Sewage Water |
| Shaft Seal Type | Single Mechanical |
| Rated Voltage | 115V AC |
| Hazardous Location Class | Not Rated |
| Liquid Temperature - Maximum | 140 Degrees F |
| Switch Actuation | Tether Float |
| Volute Material | Cast Iron |
| Cord Termination | Plug |
| Solids Diameter - Maximum | 2 in |
| Horsepower | 1 hp |
| Standards | UL 778, CSA |
| Current | 12 A |
| Cord Length | 10 ft |
| Series | PRG |
| Feet of Head - Maximum | 50 ft |
| Discharge Orientation | Vertical |
| Flow Rate @ 10 ft of Head | 44 gpm |
| Duty Cycle | Intermittent |
| Impeller Material | Cast Iron |
| Requires Control Panel | No Control Panel Required |
| Discharge | 2 in FNPT |
| Manufacturers Warranty Length | 3 yr |
| Mfr. Model # | PRG101A |
| Country of Origin | USA (subject to change) |
| UNSPSC | 40151517 |
Description
Grinder Pump, HP 1 hp, Rated Voltage 115V AC, Hz 60, Phase - Pumps 1, Amps 12 A, Motor Type CSCR, Body Material Cast Iron, Impeller Material Cast Iron, Shaft Seal Material - Pumps Silicone Carbide, Switch Actuation Tether Float, Switch Electrical Connection Piggyback, Off Point 6.5 in, On Point 13.5 in, Flow Rate @ 10 Ft. of Head 42 gpm, Flow Rate @ 15 Ft. of Head 39 gpm, Flow Rate @ 20 Ft. of Head 36 gpm, Flow Rate @ 40 Ft. of Head 15 gpm, Max. Head 50 ft, Min. Sump Pit Dia. 24 in